Bedienungsanleitung Linksys wrt54gl wireless g broadband router 1 free (Seite 12 von 41) (Deutsch, Englisch)

431661

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Chapter 3

Advanced Configuration

Wireless-G Broadband Router

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Setup > Advanced Routing

This screen is used to set up the Router’s advanced

functions. Operating Mode allows you to select the

type(s) of advanced functions you use. Dynamic Routing

automatically adjusts how packets travel on your network.

Static Routing sets up a fixed route to another network

destination.

Setup > Advanced Routing (Gateway)

Setup > Advanced Routing (Router)

Advanced Routing

Operating Mode Select the mode in which this Router

will function. If this Router is hosting your network’s

connection to the Internet, select Gateway. If another

Router exists on your network, select Router. When

Router is chosen, Dynamic Routing will be available as

an option.

Dynamic Routing

RIP This feature enables the Router to automatically

adjust to physical changes in the network’s layout and

exchange routing tables with the other router(s). The

Router determines the network packets’ route based on

the fewest number of hops between the source and the

destination. This feature is Disabled by default. From the

drop-down menu, you can also select LAN & Wireless,

which performs dynamic routing over your Ethernet and

wireless networks. You can also select WAN (Internet),

which performs dynamic routing with data coming from

the Internet. Selecting Both enables dynamic routing for

both networks, as well as data from the Internet.

Static Routing

Select set number To set up a static route between

the Router and another network, select a number from

the drop-down list. (A static route is a pre-determined

pathway that network information must travel to reach a

specific host or network.) Enter the information described

below to set up a new static route. (Click Delete This Entry

to delete a static route.)

Enter Route Name Enter a name for the Route here,

using a maximum of 25 alphanumeric characters.

Destination LAN IP The Destination LAN IP is the address

of the remote network or host to which you want to assign

a static route.

Subnet Mask The Subnet Mask determines which

portion of a Destination LAN IP address is the network

portion, and which portion is the host portion.

Default Gateway This is the IP address of the gateway

device that allows for contact between the Router and the

remote network or host.

Interface This interface tells you whether the Destination

IP Address is on the LAN & Wireless (Ethernet and wireless

networks) or the WAN (Internet).

Click Show Routing Table to view the Static Routes you

have already set up.

Click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes.

Wireless > Basic Wireless Settings

The basic settings for wireless networking are set on this

screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys wrt54gl wireless g broadband router 1 free Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info