Bedienungsanleitung Linksys wrt54gs (Seite 5 von 32) (Englisch)

431160

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Chapter 1

Product Overview

Wireless-G Broadband Router with SpeedBooster

Chapter 1:

Product Overview

Thank you for choosing the Linksys Wireless-G Broadband

Router with SpeedBooster. The Router lets you access

the Internet via a wireless connection, broadcast at up

to 54 Mbps, or through one of its four switched ports.

You can also use the Router to share resources such as

computers, printers and files. A variety of security features

help to protect your data and your privacy while online.

Security features include WPA2 security, a Stateful Packet

Inspection (SPI) firewall and NAT technology. Configuring

the Router is easy using the provided browser-based

utility.

Front Panel

Secure Easy Setup (Orange/White) The Cisco

logo is the Router’s SecureEasySetup button. It

lights up and will stay orange when the Router

is powered on. The color orange indicates that

the Router is not using the SecureEasySetup

feature, while the color white indicates that the

Router is using the SecureEasySetup feature.

When the Router enters SecureEasySetup

mode, the Cisco logo will turn white and

start flashing. After the Router has generated

the SSID and WPA Shared Key, the Cisco

logo will stop flashing and stay white.

To clear the SSID and WPA Shared Key, press and

hold down the Cisco logo for five seconds. The

Cisco logo will flash slowly as the Router resets

itself. The Cisco logo will turn orange to indicate

a successful reset.

NOTE: SecureEasySetup is a feature that makes

it easy to set up your wireless network. If you

have SecureEasySetup devices, run the Router’s

Setup Wizard CD-ROM and follow the on-

screen instructions to use SecureEasySetup.

Power (Green) The Power LED lights up

and will stay on while the Router is powered

on. When the Router goes through its self-

diagnostic mode during every boot-up, this

LED will flash. When the diagnostic is complete,

the LED will be solidly lit.

DMZ (Green) The DMZ LED indicates when

the DMZ function is being used. This LED will

remain lit as long as DMZ is enabled.

WLAN (Green) The WLAN LED lights up when

the wireless feature is enabled. If the LED is

flashing, the Router is actively sending or

receiving data over the network.

1, 2, 3, 4 (Green) These numbered LEDs,

corresponding with the numbered ports on the

Router’s back panel, serve two purposes. If the

LED is continuously lit, the Router is successfully

connected to a device through that port. A

flashing LED indicates network activity over

that port.

Internet (Green) The Internet LED lights up

when there is a connection made through the

Internet port.

Back Panel

Reset There are two ways to reset the Router’s

factory defaults. Either press and hold the

Reset Button, for approximately five seconds,

or restore the defaults from Administration

> Factory Defaults in the Router’s web-based

utility.

Internet The Internet port is where you will

connect your cable or DSL Internet connection.

1, 2, 3, 4 These Ethernet ports (1, 2, 3, 4) connect

the Router to PCs on your wired network and

other Ethernet network devices.

Power The Power port is where you will

connect the power adapter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys wrt54gs Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info