Bedienungsanleitung Linksys wrt54gs (Seite 12 von 32) (Englisch)

431160

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Chapter 3

Advanced Configuration

Wireless-G Broadband Router with SpeedBooster

Setup > Advanced Routing (Router)

Advanced Routing

Operating Mode Select the mode in which this Router

will function. If this Router is hosting your network’s

connection to the Internet, select Gateway. If another

Router exists on your network, select Router. When

Router is chosen, Dynamic Routing will be available as an

option.

Dynamic Routing This feature enables the Router to

automatically adjust to physical changes in the network’s

layout and exchange routing tables with the other router(s).

The Router determines the network packets’ route based

on the fewest number of hops between the source and

the destination. This feature is Disabled by default. From

the drop-down menu, you can also select LAN & Wireless,

which performs dynamic routing over your Ethernet and

wireless networks. You can also select WAN (Internet),

which performs dynamic routing with data coming from

the Internet. Selecting Both enables dynamic routing for

both networks, as well as data from the Internet.

Static Routing To set up a static route between the Router

and another network, select a number from the Static

Routing drop-down list. (A static route is a pre-determined

pathway that network information must travel to reach a

specific host or network.) Enter the information described

below to set up a new static route. (Click the Delete This

Entry button to delete a static route.)

Enter Route Name Enter a name for the Route here,

using a maximum of 25 alphanumeric characters.

Destination LAN IP The Destination LAN IP is the

address of the remote network or host to which you

want to assign a static route.

Subnet Mask The Subnet Mask determines which

portion of a Destination LAN IP address is the network

portion, and which portion is the host portion.

•

Default Gateway This is the IP address of the gateway

device that allows for contact between the Router and

the remote network or host.

Interface This interface tells you whether the

Destination IP Address is on the LAN & Wireless

(Ethernet and wireless networks) or the WAN

(Internet).

Click the Show Routing Table button to view the Static

Routes you have already set up.

Click the Save Settings button to apply your changes, or

click the Cancel Changes button to cancel your changes.

Wireless > Basic Wireless Settings

The basic settings for wireless networking are set on this

screen.

Wireless > Basic Wireless Settings

Wireless Network

Wireless Network Mode From this drop-down menu,

you can select the wireless standards running on your

network. If you have both 802.11g and 802.11b devices

in your network, keep the default setting, Mixed. If you

have only 802.11g devices, select G-Only. If you have

only 802.11b devices, select B-Only. If you do not have

any 802.11g and 802.11b devices in your network, select

Disable. SpeedBooster works automatically with all

settings, providing the added bonus of increased speed

across your entire network and even greater speed when

you use SpeedBooster products only.

NOTE: SpeedBooster ONLY works in

Infrastructure Mode.

Wireless Network Name (SSID) The SSID is the network

name shared among all points in a wireless network.

The SSID must be identical for all devices in the wireless

network. It is case-sensitive and must not exceed

32 characters (use any of the characters on the keyboard).

Make sure this setting is the same for all points in your

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys wrt54gs Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info