430422
21
Zoom out
Zoom in
Vorherige Seite
1/145
Nächste Seite
11
Chapter 5: Connecting the Wireless-G VPN Broadband Router
Overview
Wireless-G VPN Broadband Router
Chapter 5: Connecting the Wireless-G VPN Broadband Router
Overview
To begin installation of the Router, you will connect the Router to your PCs, other network devices, and cable or
DSL modem. If you want to use a PC with an Ethernet adapter to configure the Router, continue to “Wired
Connection to a PC.If you want to use a PC with a wireless adapter to configure the Router, continue to “Wireless
Connection to a PC.
Wired Connection to a PC
1. Make sure that all of your network’s hardware is powered off, including the Router, PCs, and cable or DSL
modem.
2. Connect one end of an Ethernet network cable to one of the LAN ports (labeled 1-4) on the back of the Router.
Then connect the other end to an Ethernet port on a PC.
3. Repeat step 2 to connect additional PCs or other network devices to the Router.
4. Connect a different Ethernet network cable from your cable or DSL modem to the Internet port on the Router’s
rear panel.
5. Power on the cable or DSL modem.
6. Connect the power adapter to the Router’s Power port, and then plug the power adapter into a power outlet.
The Power LED on the front panel will light up green as soon as the power adapter is connected properly. The
Power LED will flash for a few seconds, and then it will be solidly lit when the self-test is complete. If the LED
flashes for one minute or longer, see “Appendix A: Troubleshooting.
7. Power on one of your PCs that is connected to the Router.
The Routers hardware installation is now complete.
Go to “Chapter 6: Configuring the Wireless-G VPN Broadband Router.
Figure 5-2: Connect to Internet Port
Figure 5-1: Connect to LAN Ports
Figure 5-3: Connect to Power Port
NOTE: You should always plug the Router’s power adapter into a power strip with surge protection.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Linksys wrv54g router wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info