Bedienungsanleitung Linksys wrv54g router (Seite 26 von 145) (Englisch)

430422

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Chapter 6: Configuring the Wireless-G VPN Broadband Router

The Setup Tab - Basic Setup

Wireless-G VPN Broadband Router

Static IP

If you are required to use a permanent IP address to connect to the Internet, then select Static IP.

IP Address. This is the Router’s IP address, when seen from the WAN, or the Internet. Your ISP will provide

you with the IP Address you need to specify here.

Subnet Mask. This is the Router’s Subnet Mask, as seen by external users on the Internet (including your

ISP). Your ISP will provide you with the Subnet Mask.

Default Gateway. Your ISP will provide you with the Default Gateway Address, which is the ISP server’s IP

address.

Primary DNS (Required) and Secondary DNS (Optional). Your ISP will provide you with at least one DNS

(Domain Name System) Server IP Address.

When you have finished making changes to the screen, click the Save Settings button to save the changes,

or click the Cancel Changes button to undo your changes.

PPPoE

Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If

you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do,

you will have to enable PPPoE.

User Name and Password. Enter the User Name and Password provided by your ISP.

Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has

been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated

due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as

soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio

button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet

connection terminates.

Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet

connection. If you are disconnected, then the Router will automatically re-establish your connection. To use

this option, click the radio button next to Keep Alive. In the Redial Period field, you specify how often you

want the Router to check the Internet connection. The default Redial Period is 30 seconds.

When you have finished making changes to the screen, click the Save Settings button to save the changes,

or click the Cancel Changes button to undo your changes.

Figure 6-3: Internet Connection Type - Static IP

Figure 6-4: Internet Connection Type - PPPoE

static ip address: a fixed address

assigned to a computer or device

connected to a network.

pppoe: a type of broadband connection that

provides authentication (username and

password) in addition to data transport

subnet mask: an address code that

determines the size of the network

default gateway: a device that forwards

Internet traffic from your local area network

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys wrv54g router Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info