Bedienungsanleitung Linksys wusb54g network adapter (Seite 10 von 40) (Englisch)

236289

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Chapter 3

Configuration

Wireless-G USB Network Adapter

Profiles

Profile This is the name of the profile.

SSID This is the SSID or unique name of the wireless

network.

Profile Information

For each profile selected, the following are listed:

Wireless Mode This is the mode of the wireless network

currently in use.

Channel This is the channel to which the wireless network

devices are set.

Security This is the status of the wireless security.

Authentication This is the authentication setting for the

network.

Connect To connect to a wireless network using a specific

profile, select the profile, and click Connect.

New Click New to create a new profile. See the next

section, “Creating a New Profile,” for instructions.

Edit Select the profile you want to change and click Edit.

Import Click Import to import a profile that is saved in

another location. Select the appropriate file, and click

Open.

Export Select the profile you want to save in a different

location, and click Export. Direct Windows to the

appropriate folder, and click Save.

Delete Select the profile you want to delete and click

Delete.

NOTE: If you want to export more than one

profile, you must export them one at a time.

Create a New Profile

The next screen is the Available Wireless Networks screen.

Available Wireless Networks

This screen provides two options for setting up the

Adapter.

SecureEasySetup This Adapter features SecureEasySetup.

This means that you can set it up with just the press of

a button when connecting to wireless routers or access

points that also feature SecureEasySetup. Both points

on the network must feature SecureEasySetup for this to

work.

Available Wireless Networks (For most users.) Use this

option if you already have a network set up. The networks

available to this Adapter are listed on this screen. You

can choose one of these networks and click Connect

to connect to it. Click Refresh to update the Available

Wireless Networks list.

Manual Setup If your network is not listed on this screen,

select Manual Setup to set up the adapter manually.

This method of setting up the Adapter is intended for

Advanced Users only.

The setup for each option is described, step by step, under

the appropriate heading on the following pages.

Click Exit to close the Setup Wizard and set up the Adapter

later.

SecureEasySetup

While using the Monitor, you might see the

SecureEasySetup button on the right-hand side of the

screen. This button can be used to set up the Adapter, if

this has not already been done. With SecureEasySetup,

setting up the Adapter is as simple as pushing a couple

of buttons. Before you press any buttons, though, you

should locate the SecureEasySetup button on the device

you’re connecting the Adapter to, such as a wireless router

or access point.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys wusb54g network adapter Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info