236289
14
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
Chapter 3
Configuration
11
Wireless-G USB Network Adapter
Wireless Mode
Infrastructure Mode Use this mode if you want to
connect to a wireless router or access point.
Ad-Hoc Mode Use this mode if you want to connect to
another wireless device directly without using a wireless
router or access point.
SSID This is the wireless network name (SSID) that must
be used for all the devices in your wireless network. It
is case sensitive and should be a unique name to help
prevent others from entering your network.
Click Next to continue, or click Back to return to the
previous screen.
If you chose Infrastructure Mode, go to Step 5 now. 4.
If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings
screen appears.
Ad-Hoc Mode Settings
Channel Select the correct channel for your wireless
network. The channel you choose should match the
channel set on the other devices in your wireless network.
If you are unsure about which channel to use, keep the
default setting.
Network Mode Select the Network Mode in which your
wireless network will operate. In Mixed mode, Wireless-B
and Wireless-G devices can operate on the same network.
In Wireless-G Only mode, no Wireless-B devices can
operate in the network.
Click Next to continue. Click the Back button to change
any settings.
If your wireless network doesn’t have wireless security, 5.
select Disabled and then click Next to continue.
Proceed to Step 6.
If your wireless network has wireless security, select
the method of security used: WEP, WPA Personal, PSK2,
WPA Enterprise, RADIUS, or LEAP. WEP stands for Wired
Equivalent Privacy, WPA stands for Wi-Fi Protected
Access, which is a security standard stronger than WEP
encryption, PSK2 stands for Pre-Shared Key 2, which
is a security standard stronger than WPA-Personal,
RADIUS stands for Remote Authentication Dial-In User
Service, and LEAP stands for Lightweight Extensible
Authentication Protocol. Click Next to continue or the
Back button to return to the previous screen.
Wireless Security
Proceed to the section for your security method.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Linksys wusb54g network adapter wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info