Bedienungsanleitung Linksys WVC80N (Seite 12 von 66) (Englisch)

602392

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Chapter 2

Installing and Using the Camera Utility

Wireless-N Internet Home Monitoring Camera

To delete a scheduled recording, check the box to the left

of the recording, and click Delete. To delete all scheduled

recordings, check the box in the upper left corner of the

table and click Delete.

Memory Requirements for Video Recordings

You may find it helpful to know how much memory is

required to hold a video recording. For information on

estimated bit rates for a typical video recording at each

available resolution and video, refer to the “Setup > Image”

section of “Chapter 3: Advanced Configuration with the

Web-Based Utility.”

NOTE: In order for the scheduled recordings to

occur, the Camera Utility must be running on a

networked PC.

NOTE: The maximum length of a recording file

is one hour. If a recording is more than one hour

long, then multiple files will be saved.

Setup > Settings

Click the Settings tab to configure the Camera Utility’s

settings.

Setup > Settings

Recording Path

Recording This is the drive and folder where recorded

video files will be saved on your computer. The default is

C:\ D ocum e nts an d Set tings \ <use r name> \My

Documents\storage

, where <username> is your Windows

user name.

Instant Recording Time Limit

Maximum Time Limit for Instant Recording This is the

maximum length of a recording started by clicking the

Record button on the Monitor window. Select the length

of time from the drop down menu. The options are 1 min,

5 mins, 10 mins, 15 mins, 30 mins, 45 mins, 1 hrs, 2 hrs,

and 4 hrs. The default is 1 min.

Motion Detection

The following setting applies only if the Motion Detection

Recording feature is enabled.

• Record This is the length of video prior to and

following the detection of motion that will be saved

with the recording. Having this additional footage can

help to show the motion more clearly when it occurs.

Select the length of time from the drop down menu.

The options are 5 secs, 10 secs, 15 secs, and 20 secs.

The default is 10 secs.

Disk Space for Each Camera Recording

Total Disk Space This is the total amount of storage

space on your hard drive.

Available Disk Space This is the total amount of

remaining storage space on your hard drive.

Enable Diskspace Limitation If you want to limit the

amount of disk space used by each Camera, check this

box, then complete the fields below.

• Maximum Allowed Space per Camera Enter the

maximum allowed space per camera (in MB).

• When allowed space is full Select the action to take

when the space limit is reached: Overwrite earliest

file (default), or Stop recording.

Initial Settings

Launch this utility when Windows starts Check this

box if you want this utility started automatically whenever

Windows is started.

Enable text overlays Check this box if you want text

overlays (such as date, time, and Camera name) enabled

in the video display.

Click Save to save any settings you have changed, or click

Cancel to exit without saving your changes.

If you want to use the Camera’s Web-based Utility, go to

“Chapter 3: Advanced Configuration with the Web-Based

Utility.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WVC80N Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info