Bedienungsanleitung Linksys WVC80N (Seite 15 von 66) (Englisch)

602392

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Chapter 3

Advanced Configuration with the Web-based Utility

Wireless-N Internet Home Monitoring Camera

Video Format

To s

elect the video format, click

the Video Format button,

and

the Video Format window appears. Select either

MPEG-4 or MJPEG, then click Save. To exit without saving,

click the X in the upper-right corner of the window.

Video Format Button

Video Format Window

Setup > Basic

The Setup > Basic screen appears when you click the Setup

tab or Advanced Configuration on the Welcome screen.

The Setup > Basic screen allows you to alter the Camera’s

Device settings, Network settings, Wireless settings, and

Security settings.

Setup > Basic

Edit the settings on this screen as needed. Then, to save

your changes, click Apply. To cancel any unsaved changes,

click Cancel. To get additional information about the

screen’s features, click Help.

Device Settings

• Camera Name You may assign the Camera any name

up to 15 characters long. Unique, memorable names

are helpful, especially if you use multiple Cameras on

the same wireless network.

• Description Enter information about the Camera in

this field. You can enter up to 32 characters.

• LED Operation This feature allows you to enable or

disable the Camera’s LED.

• Current Date/Time This displays the Camera’s current

date and time. If it is incorrect, click Sync with PC to

use your computer’s date and time.

• Time Zone Select the time zone for the Camera’s

location.

• Adjust for Daylight Saving Time Select this to adjust

the Camera’s current time for Daylight Saving Time.

NOTE: You must deselect this option when

Daylight Saving Time ends.

Network Settings

To configure the Camera’s network settings, select the

protocol you wish to use from the dropdown menu: IPv4

only, IPv6 only, or IPv4 and IPv6. The default is IPv4

only.

• Configuration Type If you want to automatically

assign the Camera an IP address from a DHCP server,

then select Obtain Address Automatically (DHCP)

(default). If you want to assign the Camera a static IP

address, then select Fixed IP Address, and complete

the IP Address, Subnet Mask, Gateway, Primary DNS and

Secondary DNS fields.

• Address, Subnet Mask, Subnet prefix length

(IPv6 only), Gateway, Primary DNS, Secondary

DNS Complete these fields if you want to assign the

Camera a static IP address. You need to enter at least

one DNS address.

Wireless Settings

• SSID Enter the network’s SSID or network name here.

• Network Type Select the network’s mode, Ad-hoc or

Infrastructure.

• Channel No If the Camera is set to Ad-hoc mode,

select its channel setting from the drop-down menu.

• Security Click Edit Security Settings to display the

Wireless Security screen.

Setup > Basic > Wireless Security

The Wireless Security screen is used to configure the

Camera’s wireless security settings to match your wireless

network settings. The settings are as follows.

Security Mode Select the wireless security mode used

by your wireless network:

• Disable (no wireless security)

• WEP

• WPA/WPA2 Personal

The method selected determines which other fields are

displayed on the screen. The different security modes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Linksys WVC80N Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info