Bedienungsanleitung Lite-On lvw 5001 dvd recorder ext retail (Seite 35 von 35) (Englisch)

234611

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

Troubleshooting Guide

Picture

The image from this unit does not appear on the

television.

--> Make sure that the TV is connected to the AUDIO/VIDEO

terminal, SCART-S-VIDEO out terminal or COMPONENT VIDEO

OUT terminals on this unit. (refer to “CONNECTING UP section)

--> Make sure that the television’s input setting is correct.

--> Make sure that a disc is well-placed on the disc tray and is

compatible to the local TV system (NTSC or PAL)

--> Check whether the recorder is set to progressive with an

incompatible TV. Reset by pressing [u], “5,” “0,” “0,” and “1” on

the remote control and then press [ENTER].

The image from this unit appears with noises.

--> The disc is distorted or flawed.

--> If the picture output signal from the recorder passes through

your VCR to get to your TV, or if you are connected to a

combination T V/VIDEO player, the copy protection signal applied

to some DVD programs could affect picture quality. If you still

experience this problem even when you connect your recorder to

your TV, try connecting your recorder to your TV’s S-VIDEO

output.

The image from an external input is distorted.

--> If the video signal from the external component is copy-

protected, you can not connect via the recorder. Connect the

component directly to your TV.

Sound

There is no sound

--> Check the audio cable connection.

--> Check if the audio cord is damaged.

--> The input source setting on the amplifier is incorrect.

--> There’s no sound when the picture is paused or during

scanning (even forwards at regular playback speed) or slow

motion play. Press [PLAY] to resume regular playback.

--> If the audio signal does not come through the DIGITAL OUT

(OPTICAL or COAXIAL) jacks, check the AUDIO OUT settings.

The sound from this unit is not presented prop-

erly or is distorted.

--> Check the audio cable connection.

--> Check if the audio cord is damaged.

--> Make sure that the amplifier/receiver or TV is set to the correct

input and the volume is turned on.

--> If the sound is distorted, try cleaning the cable plugs.

Playback

Can’t playback a disc recorded using this re-

corder or another player

--> If the disc was recorded in video mode, make sure that it’s

finalized.

--> Some players will not play recordable DVD discs when

recorded in video mode and finalized.

--> Discs recorded with copy-once material cannot be played on

non-CPRM compatible players.

The recorder starts playing the disc

automatically.

--> The DVD VIDEO features an auto playback function.

Timer Recording

Timer recording does not work properly

--> The timer program is incorrect. Correct the program.

--> Different timer program times overlap.

--> The clock setting is wrong. Go to setup to set the right time and

date.

--> An already finalized DVD+R has been inserted: change disc.

The timer program remains even after recording

finishes.

--> The timer program remains if set to daily or weekly.

Recording

Can’t record.

--> You haven’t inserted a disc or the disc you inserted cannot be

recorded on. Insert a disc the unit can record onto.

An alternate audio track cannot be recorded.

--> Second Audio Program (SAP) is not available for all programs.

--> The recorder does not feature “Second Audio Program (SAP)”

function.

Recording does not start immediately after you

press the [RECORD] button.

--> Disc preparation process is taking place and will take a short

while. (applicable to DVD-R/RW and DVD+R/RW discs)

TV channel

TV channels cannot be changed.

--> Switch the input signal source of the recorder to “TV.”

--> Connect the antenna cables correctly.

No playback on DVD recorder.

--> There’s no recording on the disc. Check the disc first.

--> A unplaybackable disc type is inserted. Check the playable disc

type list.

--> The way you inserted the disc is wrong. Insert the disc with the

label side facing up. If there’s no label on the disc, check the disc

retailer.

--> Wrong region code: The region code on the recorder and the

disc must match.

--> Parental control is on: you have to unlock it first. (default code of

the recorder: 0000)

--> Check of the cables are secured between the TV set and the

recorder.

Others

The disc does not open/close.

--> Contact your local dealer or local authorized service facility.

The unit stops at “HELLO” and does not respond

to any other commands.

--> Turn the unit off and turn it on again. If the unit still does not

respond to any commands, unplug the power cord, reconnect it

and turn it on again. Contact local dealer or authorized service

facility if the unit still does not work.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lite-On lvw 5001 dvd recorder ext retail Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info