Bedienungsanleitung Little tikes 621437 Slam n Curve Slide Waterpark (Seite 5 von 6) (Englisch)

815243

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Water Park Placement

Designate a flat, level surface that allows for 6.6 feet (2m) of minimum clearance around the

Water Park.

NOTE: DO NOT place the Water Park on a hard surface like asphalt, concrete or packed earth as

both serious bodily injury and damage to the Water Park could result.

ASSEMBLY AREAS

• Make sure the assembly area is flat and level and is free of rocks, sharp objects or other

obstructions.

• Do not set up the Water Park on a slope or inline.

• Do not set up the Water Park on hard-packed earth, asphalt, decking or any hard surface as

doing so may result in physical injury and/or damage to the Water Park.

• Once the Water Park is inflated or filled with water, do not attempt to drag it to another location.

• Check your local county or city regulations for requirements on securing the pool.

• Secure the pool from unauthorized use.

Minimum Clearance Zones

MINIMUM CLEARANCE ZONES

Make sure that there is a 6.6 ft. (2m) obstacle-free zone around the

product, including the slide and overhead.

INFLATABLE SIZE: 12.9W x 9.8D x 7.9H feet (3.9 x 2.9 x 2.4 m)

Unfolding the Water Park

Remove contents from the

carrying bag.

Unroll and unfold

the Water Park in

the center of the

designated area.

CAUTIONS: The Water Park and all its anchorage points should be checked before and during use.

Reinflate or re-secure as appropriate. DO NOT let children play on the water park until it is fully inflated!

Staking the Water Park

WATER PARK CAUTIONS:

• Drive ground stakes completely into the

ground to avoid tripping hazard.

• Do not use the Water slide until an Adult

has assembled, staked down, and fully

inflated.

• Do not set up or inflate the Water Park in

windy and/or rainy conditions as wind gusts

may cause the park to become unstable and

possibly be lifted from the ground.

Secure the Water Park to the ground with

the provided stakes. To prevent tripping,

pull the stake loops all the way out, then

drive stakes completely into the ground.

Secure the

Blower to the

ground with

the provided

stakes.

Entrance/Exit

Slide

Climbing

Wall

7.9 ft.

(2.4 m)

9.8 ft.

(2.9 m)

6.6 ft. (2 m)

6.6 ft.

(2 m)

6.6 ft. (2 m)

6.6 ft.

(2 m)

6.6 ft.

(2 m)

12.9 ft.

(3.9 m)

Turn on the garden hose and adjust the

pressure as desired. Make sure that a

steady spray of water comes out of the

sprayer and keep the slides wet.

Once Water Park is

inflated, attach the

Water Anchor Bag to

the plastic connectors

at the base of the

Water Park. Once attached, fill the Anchor Bag with water until it is

completely full.

NOTE: The Water Anchor Bag needs to be attached to the Water Park whether or not the Water Sprayer is used. The Water

Anchor Bag prevents the Water Park from toppling over when people climb on it.

Water Park Spray Assembly, Part 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Little tikes 621437 Slam n Curve Slide Waterpark Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info