• Tighten all hardware, but do not over-tighten to prevent splintering.
• Lubricate all metallic moving parts per manufacturer's instructions.
• Check that swing hanger bolts are secure and tight. Quick clips should be
completely closed and threaded clips screwed tight. Ropes should be
secure at both ends so they cannot loop back and create an entrapment.
• Check all protective coverings on bolts, pipes, edges and corners. Replace
if they are loose, cracked or missing.
• Check for sharp edges or protruding screw threads. Add washers if
required.
• Check ground stakes for looseness, damage or deterioration. Ensure soil
conditions are adequate to rmly hold the stakes. Firmly anchor unit to
the ground during use. Re-secure or replace if necessary.
• Check all moving parts including swing seats, ropes, cables, and chains
for wear, rust or other deterioration. Replace as needed.
• Check metal parts for rust. If found, sand and repaint using a non-lead
based paint which complies with 16 CFR 1303.
• Check all wood pieces for deterioration and splinters. Sand down
splinters and replace deteriorating wood.
• Reinstall any plastic parts, such as swing seats or any other items that
were removed for the cold season.
• Rake and check depth of loose ll protective surfacing materials to
prevent compaction and to maintain appropriate depth. Replace as
necessary.
Should you elect to use a third party person or service to assemble this product, the manufacturer assumes no responsibility or liability for any charge
incurred for any assembly services. Please see our warranty for more information about damaged and missing part replacement coverage. Little Tikes will not
reimburse the customer for the price of parts purchased.
• Tighten all hardware, but do not over-tighten to prevent splintering.
• Check all protective coverings on bolts, pipes, edges and corners. Replace
if they are loose, cracked or missing. Check bolt covers for sharp edges.
Replace as needed.
• Check for sharp edges or protruding screw threads. Add washers if
required.
• Rake and check depth of loose ll protective surfacing materials to
prevent compaction and to maintain appropriate depth. Replace as
necessary.
• Check all moving parts including swing seats, ropes, cables, and chains
for wear, rust or other deterioration. Replace as needed.
• Lubricate all metallic moving parts per manufacturer's instructions.
At the beginning of each play season:Twice a month during play season:
• Check the swing beam and hardware every two weeks due to wood
expansion and contraction. It is particularly important that this
procedure be followed at the beginning of each season.
• Inspect wood parts monthly. The grain of the wood sometimes will lift in
the dry season causing splinters to appear. Light sanding may be
necessary to maintain a safe play environment. Treat your unit with
stain regularly to help prevent severe splitting and other damage.
• A waterborne transparent stain has been applied to your unit. This is
done for color only. Once or twice a year, depending on your climate
conditions, you must apply some protection (sealant) on your unit. Prior
to the application of the sealant, lightly sand any rough spots on your
unit. Please note this is a requirement of your warranty.
• Assembling and maintaining the unit on a level surface is very
important. As your children play, your unit will slowly dig its way into
the soil, and it is very important that it settles evenly. Make sure the unit
is level once each year or at the beginning of each play season.
Additional Maintenance:
• Remove plastic swing seats and other items as specied by the
manufacturer and take indoors. Plastic components may become more
brittle in cold conditions.
• Rake and check depth of loose ll protective surfacing materials to
prevent compaction and to maintain appropriate depth. Replace as
necessary.
At the end of each play season:
* Or when the temperature falls below 32º F
Owners MUST maintain the legibility of the warning labels.
DISPOSAL
Once you no longer desire to play with or keep the unit, it
should be disassembled and disposed of in such a way
that no unreasonable hazards exist at the time the unit is
discarded. Follow local waste ordinances.
WOOD WEATHERING
Although the manufacturer has taken great care in selecting premium lumber, wood is a product of nature and is susceptible to weathering. As the climate
changes, moisture moves in and out of the wood, causing tension which can result in checking and warping.
• Checking: Surface cracks in the wood along the grain.
• Warping: Distortion from the original plane of the board. This usually happens from wetting and drying of the wood.
• Fading: A natural change in the wood color as it is exposed to sunlight. Wood may turn gray over time.
The factory-applied coating will decrease over time due to water absorption and sunlight. Apply a water repellent or stain on a yearly basis. Most weathering
is a normal result of nature and will not aect safe and enjoyable play on this unit. If you have any concerns about weathering, contact consumer service.
ONLY REPLACE DAMAGED OR DEFECTIVE PRODUCT PARTS ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.
IF BOLT PROTRUDES
BEYOND T-NUT
USE AN EXTRA
FLAT WASHER
66
Step 111:
Align the Left and Right Uprights. Note the location of the angled edges. Insert (2) Ladder Rungs (029)
into the grooves of the Left and Right Uprights. Attach the Ladder Rungs using (12) Screws (S92).
Step 112:
Attach (1) Rear Board (031) to the Uprights using (2) Screws (S95).
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Little tikes 656200 Panther Peak wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
