Bedienungsanleitung Livarno IAN 353989 (Seite 13 von 58) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Polnisch)

793234

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

13 GB/IE

Introduction Introduction / Safety

Parts description

1 Reﬂector

2 Flexible lamp arm

3 Base (14122206L)

4 ON / OFF switch

(14122206L)

5 Mains plug

6 Screw clamp

(14152006L)

7 Screw (14152006L)

8 ON / OFF in-line

switch (14152006L)

Technical data

Model no.: 14122206L / 14152006L

Operating voltage: 230–240 V∼ 50 Hz

Rated output: LED, 7.5 W

Lamp: 1 x LED module

Protection class: II /

Safety

Safety notices

Damage due to failure to comply with these operatin

instructions will invalidate the warranty! We assume

no liability for consequential damage! We assume

no liability for material damage or personal injury

due to improper handling or failure to comply with

the safety instructions!

RISK OF FAT

INJURY AND ACCIDENT HAZ-

ARD FOR TODDLERS AND

SMALL CHILDREN!

Never leave children unattended with the

packaging material. The packaging material

represents a danger of suﬀocation. Children

frequently underestimate the dangers.

Do not leave the light or packaging material ly-

ing unattended. Plastic ﬁlm or bags, plastic parts,

etc. are dangerous for children to play with.

This device may be used by children age 8 years

and up, as well as by persons with reduced phys-

ical, sensory or mental capacities, or lacking

experience and / or knowledge, so long as they

are supervised or instructed in the safe use of

the device and understand the associated risks.

Children should not be allowed to play with the

device. Cleaning and user maintenance should

not be performed by children without supervision.

Avoid the risk of fatal injury

from electric shock

Check the lamp for possible damage before

every use. Never use the light if it shows any

signs of damage.

A damaged light means danger of death from

electric shock. In the event of damage, repairs

or other problems with the light please contact

the service centre or a qualiﬁed electrician.

The external ﬂexible cord on this light is not

replaceable; if the cord is damaged the light

must be disposed of.

Verify the existing mains voltage matches the

required operating voltage of the lamp (see

“Technical data“) before use.

Ensure that the light does not come into contact

with water or other liquids under any circum-

stances.

Always unplug the lamp from the mains prior

to assembly, disassembly, cleaning or if the

lamp will not be used for extended periods.

Never open any of the components of the elec-

trical equipment or insert any objects into the

same components. This will pose a risk of fatal

injury from electric shock.

The illuminant in this light must be replaced by

the manufactured or an authorised technician

or similarly qualiﬁed person.

This light is not suitable for dimmer

or electronic switches.

Prevent fire and

injury hazards

Do not look into the illuminant from a close

distance during operation.

Do not look at the LED with an optical instrument

(e.g. magniﬁer).

Do not cover the lamp or the mains plug with

objects. Excessive heat can result in a ﬁre.

Do not operate the lamp unattended.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Livarno IAN 353989 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info