Bedienungsanleitung LivarnoLux 14121305L - IAN 283331 (Seite 7 von 25) (Deutsch, Englisch, Holländisch)

662528

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

7 GB/IE/NI

Introduction / Safety

Base (14121305L)

Locating screw (14121305L)

Lamp arm (14121305L)

Lamp ring (14121305L)

Lamp shade (14121305L)

Lamp socket (14121305L)

Technical Data

Model no.: 14121106L / 14121209L /

14121305L

Operating voltage: 230–240 V∼ 50 Hz

Rated power: 7 W

Protection class: II /

Safety

Safety advice

The right to claim under the guarantee shall be

rendered invalid in respect of damage caused by

the non-observance of these operating instructions!

No liability is accepted for consequent damage!

No liability is accepted for damage to property

or persons caused by improper handling or non-

observance of the safety advice!

To avoid danger to

life from electric shock

Every time before connecting the lamp the mains,

check it and the mains lead for damage. Never

use your light if you ﬁnd it is damaged in any way.

A damaged light bulb means

your life is at risk from electric shock. If there is

any damage, repairs to be carried out or other

problems related to the light bulb, please contact

the service centre or a qualiﬁed electrician.

In order to prevent hazards, if the outer ﬂexible

cable of this lamp becomes damaged it may only

be replaced by the manufacturer, a service repre-

sentative of the manufacturer or a similar speciali

st!

Before assembly, ensure that the mains voltage

available corresponds to the operating voltage

necessary of the light (see “Technical Data“).

Never let the lamp come into contact with water

or other liquids.

Always unplug the light from the mains prior to

assembly, disassembly, cleaning or if the light

will not be used for extended periods.

Never open or insert anything into electrical

ﬁttings or equipment. Doing this sort of thing can

lead to a serious danger to life from electric shock.

To avoid danger

of fire and injury

CAUTION! RISK OF INJURY! Check bulbs

for damage immediately after unpacking. Do

not ﬁt defective bulbs into the light. If they are,

contact the service point for a replacement.

CAUTION! RISK OF BURNS DUE TO

HOT SURFACES! Ensure the lamp has been

switched oﬀ and allowed to cool before you

touch it. In this way you will avoid the danger

of burns. Bulbs give oﬀ a lot of heat around the

top of the lamp.

Do not cover the light or the mains plug with

objects. Excessive heat can result in a ﬁre.

Never leave the lamp operating unattended.

Do not allow the lamp or the packaging materials

to lie around unattended. Plastic ﬁlm or bags,

Styrofoam etc. can turn into dangerous toys for

children.

ATTENTION!

Do not look into the LED from a close distance

during operation.

Do not look at the LED with an optical instrument

(e.g. magniﬁer).

This light is not suitable for dimmer

or electronic switches.

Working safely

Install the light so that it is protected from

moisture and dirt.

Prepare carefully before assembly and allow

yourself enough time. Lay out all the individual

components and additional tools or materials

required so that you can see and reach them.

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LivarnoLux 14121305L - IAN 283331 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info