Bedienungsanleitung Livin Flame Jura (Seite 22 von 44) (Deutsch, Englisch, Holländisch, Französisch)

742179

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

6b.17 Adjusting the set temperature

• Press the ‘+’ or ‘-’ button to increase or decrease the set temperature on the basis of

your comfortable temperature setting.

• ECO means 2℃ lower than your comfortable temperature setting,

ECO- means 4℃ lower,

COMF+ means 2℃ higher,

COMF++ means 4℃ higher.

6b.18 To check your daily timer settings, press .

6b.19 If heating needs to be turned off, it will be necessary to go back to the Normal Mode to turn off.

Week Timer Heating

6b.20 The following are preset heating periods, which can be altered if desired.

From Monday to Friday

06:00 until 08:30

17:00 until 22:00

From Saturday to Sunday

06:30 until 09:30

11:00 until 13:00

17:00 until 22:00

6b.21 Press until shows at the upper right corner of the screen, then enter the week timer heating mode.

6b.22 Hold button for 6 seconds to enter the week timer setting.

• Press ‘←’ or ‘→’ to move the cursor (a flashing underline), press the button in the corresponding week position to

select (the character is highlighted) or cancel (the character is displayed normally) the current setting. Several days can be

selected together.

• Press the ‘→’ button to move the cursor to the time period setting area. Press ‘←’

‘→’ to choose hour or minute, press ‘+’ or ‘-’ to set the number.

• Max 3 heating periods for a day.

• Minute will increase/decrease by 15 minutes per press.

• Press the to set the heating time for the selected day(s) and return to the week line.

• Hold for 3s or wait for 10s to save and exit the heating time period setting.

6b.23 Press , ‘←’ and ‘→’ to check your week Timer settings.

6b.24 If heating needs to be turned off, it will be necessary to go back to the Normal Control Mode to turn off.

Advance Mode

6b.25 Under the daily and week timer mode, Press :

6b.26 To turn the heater off when the heater is on during a preset heating period.

6b.27 To turn the heater on when the heater is off in between preset heating periods.

Adaptive Start Control

6b.28 According to room temperature and set temperature, the heater will automatically come on in time to heat the

room to the set temperature at the set time. For example, if your timer is set to start at 18:00 and temperature is set to

23°C, the fire will come on at 17:30 to ensure the room is 23°C at 18:00.

Window Open Detection

6b.29 When the transmitter detects a rapid drop in room temperature, it will be judged as a window open, the warning

icon will be displayed and the heating will be turned off automatically.

6b.30 After the indoor temperature has risen or a manual override of warning (by operating remote control) has been

done, the fire will return to normal working state.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Livin Flame Jura Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info