Bedienungsanleitung Livington Everclean Mop (Seite 6 von 20) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

783910

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

IMPORTANT INFO + FUNCTION:

With the Livington Everclean Mop, you only ever use clean/rinsing water to clean your ﬂoors.

The mop is sprayed with clean/rinsing water from the sides each time it is immersed in „WASH“, thus being cleaned and re-soaked in the process.

The dirty water is directed into the separate dirty water tank during the cleaning process, and thus never comes into contact with the clean water.

So you will never wipe with dirty, already-used water.

You can use your favorite cleaning products with your Livington Everclean Mop - but always pay attention to the correct quantities and application

instructions.

ASSEMBLY + GETTING STARTED

• Press the button on the side of the handle to release the cover and lift it oﬀ (2).

• Remove the mop holder with the rods from the bucket.

• Screw the rods and the mop holder together (3). INFO: The poles are also labelled accordingly.

• Put the lid back on the bucket - IMPORTANT: There is only one correct way to ﬁt the lid onto the bucket. Pay attention to the position of

the button on the side and the corresponding indentation (2).

• Inserting the mop cloth: Insert the mop into the 2 ﬂaps on the outside on both sides and press to close (4). Warning: Do not place the middle

tab over the release button (E1)! Info: The universal pad comes pre-attached to the mop holder.

• Removing the mop cloth: Press the button down, and pull the mop out of the tabs on both sides (5).

• Inserting the batteries: Important: when using for the ﬁrst time, insert 4 x AA batteries (not included). The battery compartment is

located in the cover of your Livington Everclean Mop. Open the locking clip of the battery compartment (G), located on the top of the lid by

pulling it ﬁrmly outwards. The battery holder (H) is located in the battery compartment - you can simply pull this out with the integrated tab

(I). Now you can insert the batteries. Pay attention to the polarity when inserting the batteries. After inserting the batteries, insert the battery

holder back into the battery compartment. ATTENTION: Make sure that the silver contacts meet and that the tab lies OVER the battery

holder, so that you can use the tab again the next time you change the batteries. When the battery holder is returned correctly to the battery

compartment, close the battery compartment again with the locking clip. (6)

• Your Livington Everclean Mop is now ready for use.

• FILLING THE WATER: Unlock the water tank lid (J) by pressing the „PUSH“ ﬂap (also recognizable by the water droplet on the water tank

lid), open it and pour in clean water up to the „MAX“ mark (7).

• Switch on the pump by pressing the „WASH“ button (D2) - the button lights up (press the same button to switch it oﬀ - the light turns oﬀ) (8).

• Moistening: Insert the mop into the “Wash” opening (D1), and fully immerse it 3-4 times (9). IMPORTANT: The water pump has a sensor that is

only activated after switching on the wash button once the mop is in the device. If the mop is not in the container, no water will be pumped! This

is not a defect.

• If the mop is too damp for the intended application, switch oﬀ the pump by pressing the „Wash“ button again and move the mop up and down

several times, to achieve the desired level of dryness. This means you can mop when very wet (for heavily soiled surfaces) or almost dry, for

polishing. Pay attention to the type of ﬂooring.

INFO: You can regulate the degree of dryness by the speed of immersion. The faster you move the mop in and out, the drier it will become.

• Now you can start cleaning (10)

• Cleaning the dirty water tank: You can remove and clean the transparent half by pressing the buttons on both sides (11).

CLEANING AND CARE:

The mop can be cleaned with a damp cloth and a mild detergent. Both cloths are machine washable. Made in China

REMARQUES IMPORTANTES + CONSIGNES DE SÉCURITÉ

• Lisez les instructions avant utilisation. Conservez les instructions dans un endroit sûr pour toute

consultation ultérieure.

• N‘utilisez pas le produit s‘il est en mauvais état ou défectueux.

• Cet appareil peut être utilisé par des enfants âgés de 8 ans et plus ainsi que par des personnes

ayant des capacités sensorielles, mentales ou physiques réduites ou un manque d‘expérience

et de connaissances si ces personnes ont été supervisées ou ont été informées de l‘utilisation

en toute sécurité de l‘appareil et si elles comprennent les dangers qui en résultent. Les enfants

ne doivent pas jouer avec l‘appareil. Le nettoyage et l‘entretien utilisateur ne doivent pas être

M23450_Livington Everclean Mop_Manual_20210331_MH.indd 6M23450_Livington Everclean Mop_Manual_20210331_MH.indd 6 29.04.21 12:2829.04.21 12:28

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Livington Everclean Mop Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info