Bedienungsanleitung Livington M6608 (Seite 8 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch)

578010

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ture control lamp can light up periodically as the iron

keeps itself at a constant, set temperature.

TIP: The following temperature settings are available:

80-120°C using position 1 / •

120-160°C using position 2/ ••

160-200°C using position 3/ •••

180-230°C using position MAX

Always iron textiles following the manufacturer’s direc-

tions.

Sym-

bol

Mate-

rial

Tem-

pera-

ture

Steam Jet

steam

Spray

functi-

Syn-

thetics/

silk

x x

✓

Wool

✓

Cotton,

linen

MAX

✓ ✓ ✓

Tip: this symbol means „Do not iron“

✓- can be used.

x - cannot be used.Ironing

a) Using the cable

1. Set the cable mode button to

(corded ironing – il-

lustration K)

2. Lift up from the base station and iron with the cord

attached

3. As soon as you have finished ironing, unplug from the

power supply, let the iron cool down fully and then

store it in a dry place

b) Cordless

1. Set the cable function button to

(cordless ironing

– illustration M) and the iron will separate from the

corded unit.

2. Lift up the iron from the base station and iron without

the cable unit attached.

3. After approx. 10 seconds replace the iron onto the

charging station so that it does not cool down below

the temperature setting. The high-performance heat

and steam reservoir of the Livington iRon recharges

within 5 seconds. Typically when you use an iron,

you iron approximately every 10 seconds. It takes 5

seconds to move the garment. This is exactly the time

the Livington iRon needs to recharge and reach tempe

rature. You should therefore always replace the iron in

the station while you move a garment.

IMPORTANT: Should you stop ironing for a while, always

put the iron back on the base station to allow it to heat

back up again.

The less often you use the shot of steam function, the

longer you will be able to iron in cordless mode, without

needing to heat the iron back up again. We therefore

recommend corded ironing if you need to use the shot of

steam function very regularly.

4. As soon as you have finished ironing, unplug the cable

from the mains and allow it to cool down completely

and store it afterwards in a dry place.

Nano-ceramic easy glide sole plate

The scratch-resistant Nano-ceramic easy glide sole plate

provides the best possible care for your textiles. Heat is

stored for longer, enabling you to effortlessly smooth out

creases on different items of clothing.

Steam and spray functions:

Shot of steam (illustration E)

By pressing the shot of steam button, steam is imme-

diately released to help remove tough creases. Please

check that there is a sufﬁcient amount of water in the

water tank.

By using the steam controller (illustration G), you can set

the desired amount of steam required. When set to “off“,

you can iron without steam.

The shot of steam function can also be used when

holding the iron in a vertical position. Take care never to

direct steam at people or animals.

The shot of steam function can only be activated at

temperatures between •• and MAX.

This iron is equipped with an anti-drip function: at very

low temperatures, steam production is automatically in-

terrupted so that no water can drip out of the sole plate.

Spray button (illustration F)

On pressing the spray button, a ﬁne cloud of spray is

produced to dampen difﬁcult to iron textiles. If required,

press the spray button several times to ensure that the

item of clothing is damp enough. Check that there is a

sufﬁcient amount of water in the water tank.

Textile brush

1. Place the textile brush attachment onto the ironing

board and push the iron onto the textile brush attach

ment. (illustration Q). Warning: there is the risk of

burns, as the sole plate of the iron gets very hot.

2. To remove the textile brush attachment, use the hook

at the tip of the textile brush. Clamp the hook at the

tip of the textile brush attachment and carefully pull

textile brush attachment from the iron’s sole plate.

(Illustration R)

WARNING: there is the risk of burns as the soleplate of

the iron and the textile brush attachment can get hot.

CLEANING AND MAINTENANCE

After ironing

1. Unplug the appliance and let the iron cool down fully

2. Empty the water tank. Clean the sole plate using a

damp towel and a non-foaming (fluid) cleaning agent

to remove calk and other impurities.

3. Clean the casing with a damp towel.

4. Keep the empty iron upright on a secure surface.

You may wish to protect the iron plate with a piece of

material.

Self-cleaning function

1. Fill the water tank with water, set it to the highest tem

perature and plug it into an electrical socket. Check

that the steam controller is set to ”off”.

2. The temperature control button lights up. As soon as it

has gone out, hold the iron over the sink and turn the

steam control backwards using a little pressure. Steam

and boiling water will flow out of the sole. Impurities

and calk droplets are rinsed away.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Livington M6608 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Livington M6608

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info