Bedienungsanleitung Livington Prime Everyday M24693 (Seite 10 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

783928

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

10 11

never be allowed to play with the device.

Cleaning and user maintenance must

never be performed by children without

supervision.

USE

Before ﬁrst use: remove all packaging material and

protective ﬁlms. Do not remove the type shield from the

product. Check that the delivery contents are complete,

and ensure that there is no damage to the product and that

it is assembled correctly. If any damage is evident, refrain

from using the device and contact our customer services

(see details on the back).

Charging (# 2 + 3)

1. Make sure that the device is turned oﬀ.

2. Connect the narrow end of the USB cable to the USB

socket on the universal vacuum cleaner, and connect

the wide end of the USB cable to the power adapter.

Plug the power adapter into an electrical outlet.

3. During the charging process, the LED indicator and

the battery charge indicator will ﬂash blue (charging

time: approx. 3-4 hours)

4. As soon as the battery is fully charged, both

indicators light up continuously in blue and the

device can be disconnected from the power supply.

Note:

• As soon as the battery charge is low, the LED display will

start to ﬂash. You should charge the device as soon as

possible.

• If the device is not used for a long time, the battery

charge level drops; please charge the battery once or

twice every six months.

Switching on & oﬀ and regulating the power

1. Switching on: Press the On/Oﬀ button to switch on

the universal vacuum cleaner. The blue operating

light comes on. The device will run at the ﬁrst

power level. Note: After you have pressed the On/

Oﬀ button, there will be a 1-2 second delay before

the motor develops its full power. This is a safety

measure, and is not a defect.

2. Controlling the power: Press the +/- button once to

activate the higher power level. To switch back to the

initial power level, press the +/- button again.

3. Switching oﬀ: Press the On/Oﬀ button again to

switch oﬀ the device. The operating LED switches oﬀ

with the device.

USE OF ACCESSORIES

Crevice nozzle (#4) / Brush nozzle (#5) / Long ﬂexi nozzle (#6)

1. Insert the desired attachment into the suction

opening of the device, pushing it as far as it will go.

Crevice nozzle: cleaning of joints, chair slats, car

interiors, corners, etc.

Brush nozzle: cleaning of sofas, armchairs,

scratching posts, animal beds, sensitive surfaces, etc.

Long ﬂexi nozzle: To assemble the ﬂexi nozzle, slide

the end piece onto one end and the connector onto

the other end of the ﬂexi nozzle pole. Make sure that

both parts are ﬁrmly fastened. Tip: If you are having

problems attaching the parts, try brieﬂy immersing

the pole in warm water to slightly soften the material.

The water should not be too hot, to avoid deformation

of the pole. Dry the pole before assembling the ﬂexi

nozzle.

The ﬂexi nozzle is suitable for cleaning hard-to-reach

areas, such as curtain rods, narrow spaces etc.

2. Switch on the device at the desired power level. We

recommend the lower power level for the cleaning of

upholstered furniture.

3. Switch the vacuum cleaner oﬀ after use and remove

the nozzle. Remove any dirt residue such as hair and

lint from the brush nozzle immediately after use.

The crevice nozzle and brush nozzle can be easily

attached to the storage station.

EMPTYING THE DUST COLLECTOR

Note: To prevent blockages and a decrease in the suction

power, we recommend emptying the dust collector after

each use.

Rapid emptying (# 7+8)

1. Turn oﬀ the device.

2. Hold the vacuum cleaner with the suction opening

facing down over a waste bin.

3. Press the rapid emptying button on the container to

easily and conveniently empty the dust collector.

4. Fold the lid of the dust collector back down again

until it ﬁrmly clicks into place. Make sure that the

container is tightly closed.

Dust collector removal (# 9)

To entirely remove coarse, stubborn dirt from the dust

collector, you can remove the entire container and rinse it

oﬀ. Make sure that the container is completely dry before

you re-attach it to the device.

1. Switch oﬀ the universal vacuum cleaner.

2. Hold the vacuum cleaner with the suction opening

facing up.

3. Press the release button once, and remove the dust

collector.

4. Now grasp the small metal bracket on the ﬁlter

unit and pull the unit out. Now simply empty the

container, and rinse if necessary. Alternatively, you

can also press the rapid emptying button.

Note: Only rinse the dust collector after the ﬁlter unit has

been removed.

FILTER REPLACEMENT/CLEANING (# 10-11)

1. Make sure that the device is switched oﬀ.

2. Remove the dust collector from the device as

described above.

3. Now remove the ﬁlter unit from the container by

folding up the small metal bracket on the unit and

pulling on it.

4. Separating the ﬁlter: Hold the metal bracket with

one ﬁnger; the plastic cover of the stainless steel

ﬁlter should face upwards. Paying attention to

the markings on the stainless steel ﬁlter, turn the

stainless steel ﬁlter slightly to the left (direction

„open lock“) and separate the ﬁlters. Now you can

remove the hepa ﬁlter and clean the ﬁlters.

5. Inserting a new hepa ﬁlter: To insert a new hepa

ﬁlter, place it in the stainless steel ﬁlter (pay attention

to the brackets inside the stainless steel ﬁlter). Now

M24693_M24694_M24329_M24330_livington_prime_everyday_Manual_20200923_KS.indd 10M24693_M24694_M24329_M24330_livington_prime_everyday_Manual_20200923_KS.indd 10 23.09.20 16:4923.09.20 16:49

Livington Prime Everyday M24693 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info