Bedienungsanleitung Livington SmartChill M27805 (Seite 10 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

783638

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

TIPS:

• Place the Livington SmartChill on a raised

surface, such as a table, desk, or sideboard.

• You will feel the eﬀect greatest when sitting

directly in front of the Livington SmartChill.

• Even if the water tank is empty, the ﬁlter

remains wet and the Livington SmartChill

continues to cool.

• The colder the water used, the cooler the

eﬀect. You can therefore also consider using

ice water or water with ice cubes.

• For best results, moisten the ﬁlter under cold

running water, or place it in the freezer. Note: If

you buy a second ﬁlter along with the product,

you can always keep one pre-cooled in the

freezer.

SETUP:

1. Place the Livington SmartChill on a level

surface. NOTE: Use the built-in cable guides on

the rear panel to keep the cable away from the

fan (see Fig. 1).

2. Open and ﬁll the water tank (see Fig. 2): We

recommend using a jug or measuring cup. Do

not carry the appliance to ﬁll it. Water could

leak or spill from it. Open the water tank door

and ﬁll the tank to the MAX mark. Close the

water tank cover when ﬁnished.

3. Removing and moistening the ﬁlter: Open the

rear door on the appliance (see Fig. 3). Now

fold the black safety bar upwards (see Fig. 4)

and pull out the compartment that contains the

ﬁlter (Fig. 5). Now remove the ﬁlter (see Fig.

6). You can now dampen the ﬁlter. Note: For

best results, moisten slightly under running

water (see Fig. 7). For even greater cooling,

place the wet ﬁlter in the freezer until it is

frozen. Then place it back in the compartment

(ensuring that the black ﬁlter cover points

upwards), fold down the safety bar and close

the appliance door (see Fig. 8).

Note: The appliance will not work if the door is

open. This is a safety precaution.

4. Plug the narrower end of the cable into

the connector on the back of the Livington

SmartChill and plug the power adapter into an

electrical outlet (see Fig. 1). NOTE: Use the

built-in cable guides along the back to keep

the cable away from the fan.

USE:

1. To turn on the Livington SmartChill, press the

on/oﬀ switch (see Fig. 9).

2. Set the speed of the fan by pressing the switch.

You can choose between low, medium and high

modes. The indicator lights next to the switch

show you the speed at which the Livington

SmartChill is currently running (see Fig. 9).

3. Air ﬂow adjustment: Press the air ﬂow control

button once to activate the swing function. The

blades on the appliance will now swivel. To ﬁx

the blades in place, press the button again (see

Fig. 10).

4. Pressing the backlight button turns on night

lighting - the default setting is high brightness.

• Standard: Light on, high brightness

• Press once: Low brightness

• Press twice: Light oﬀ (see Fig. 11)

5. To turn oﬀ the Livington SmartChill, press the

button until the fan is switched oﬀ (one press

of the button after the lowest speed) and the

mode indicator lights are no longer illuminated

(see Fig. 9).

CLEANING (see Fig. 12)

Disconnect the appliance from the power supply

before cleaning. We recommend cleaning the

water tank and the inside of the unit once a week.

Use a non-abrasive cloth and, if necessary, a

mild detergent. For best results, we recommend

changing the ﬁlter (depending on its condition)

every 3-6 months.

UNIT CLEANING

To prepare for cleaning, run Livington SmartChill

until all water has emptied from the water tank,

or hold the Livington SmartChill over a sink and

carefully drain to avoid splashing or spilling. If

you notice that the water tank is dirty, use a small

ﬂexible brush (i.e. toothbrush, bottle brush, etc.)

and gently brush the inside of the tank until it is

clean. Rinse with warm water.

CLEANING THE FILTER

Remove the ﬁlter insert from the Livington

SmartChill. Using warm soapy water, wipe the

ﬁlter cartridge and tray, then rinse until clean.

!!Allow to air-dry completely!! (see Fig. 7)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Livington SmartChill M27805 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info