538689
11
Zoom out
Zoom in
Vorherige Seite
1/23
Nächste Seite
GPS Walker User Manual
9
Format the GPS data logger by using the Windows
Format Tool
1. Connect the GPS data logger to the computer.
2. Right click on the disk representing the GPS data logger.
3. Select format and start the formatting process.
Note: Do not select NTFS from the Format File System menu. Otherwise, the GPS
data logger will not function, and you will need to format it again.
GPS
Menu options
GPS Menu Description
GPS Power Turning On/Off the GPS function.
Showing the satellite signal strength. Need 3 solid bars for precise
positioning.
Press the Play button to show the Sat View
Shows the satellite number being seen, satellite number being tracked.
GPS Signal
Press Play button again to show the Position
Information such as Current Location coordinates, Date and Time will be
shown.
Log Interval
Setting the time interval for GPS position logging. The data is logged in
standard NMEA format.
Min Speed
Setting a value as the minimum speed for position logging. The system will
log points only when the current speed is above this value.
The minimum speed is valid only if Log Interval is enabled.
Mark
Marking the current location as a waypoint. This command is valid only
when the current position fix is available (2D fix or 3D fix).
Mark&Go
Marking the current location as a waypoint and setting the waypoint as the
destination in Compass menu.
This command is valid only when the current position fix is available (2D fix
or 3D fix).
Select Mark
Selecting a history waypoint, or setting a waypoint and a destination in
Compass page.
This command is valid only when the current position fix is available (2D fix
or 3D fix).
Compass
Displaying following information:
Direction to destination
Distance to destination
Current Speed
ID of destination
Follow the compass. It will guide you to the destination.
This command is valid only when the current position fix is available (2D fix
or 3D fix).
About Information about the firmware version.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Locosys GPS Walker wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info