Bedienungsanleitung Loewe Art 40 - SL2 (Seite 6 von 154) (Englisch)

645608

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

Art 40-60

User guide

For your safety, and to avoid unnecessary damage to your unit,

please read and follow the safety advice below:

Use for the intended purpose and ambient conditions

This TV set is intended exclusively for receiving and playing visual and

audio signals. It must not be used in rooms with a high level of humid-

ity (e.g. bathroom, sauna) or a high dust concentration (e.g. work-

shops). The manufacturer‘s warranty is only valid for use in the

specified permissible environment.

If the unit is used outdoors, make sure that it is protected from moisture

(rain, dripping water and splashing water or dew). High humidity and

dust concentrations lead to leakage currents in the device. This can

result in a shock hazard by touching it or even fire.

If you have moved the unit out of

the cold into a warm environment,

leave it switched off for about an

hour to avoid the formation of

condensation.

Do not place objects containing

liquids on top of the unit. Protect

the appliance against dripping and

splashing water.

Candles or naked flames must be

kept away from the TV set at all

times to prevent it from catching

fire.

Never place the TV set in a location where it is exposed to vibrations.

This may lead to damage.

Transporting

Move the device in vertical position only. Grasp the device on the

upper and lower edges of the housing.

If the set has to be put down during packing/unpacking, place the TV

set with its entire front surface lying flat on soft material such as a

blanket or the fleece from the packing material. Use a blanket or the

fleece from the packing material as an underlay.

The LCD screen is made of glass or plastic and can break if not handled

properly.

Always wear rubber gloves to carry the TV set if the LCD screen is

damaged and liquid crystal might be leaking out. In the case of skin

contact immediately rinse thoroughly with water.

Power supply

Incorrect voltages can damage the unit. This device may only be con-

nected to a power supply with the voltage and frequency indicated on the

type plate using the supplied mains cable. The mains plug of the TV set

must be easily accessible so that the device can be disconnected from

the mains at any time. When unplugging the unit from the mains, pull at

the connector body and not at the cable. The cables in the mains plug

could otherwise be damaged and could cause a short-circuit when

plugged in again.

Lay the mains cable so that it cannot be damaged. Do not step on

the mains cable. The mains cable may not be kinked or laid over sharp

edges nor be exposed to chemicals; the latter also applies to the unit

as a whole. A mains cable with damaged insulation can cause electric

shocks and poses a fire risk.

Air circulation and high temperatures

The vent slots on the rear panel of the set must always be kept un-

obstructed. Please do not place newspapers or cloths on/over the TV

set.

Ensure that there is at least

10 cm free space on the

sides and above the set for

air circulation, if the set is

placed in a cabinet or on a

shelf.

Like any electronic device,

your TV set requires air for

cooling. Obstruction of the

air circulation can cause fires.

Prevent metal items, nee-

dles, paper clips, liquids, wax, or similar items, from getting into the

interior of the device through the vent slots in the rear panel. Such

objects can cause short circuits in the set, which could possibly

cause a fire.

If something should get into the interior of the set then immedi-

ately unplug the mains plug of the device and contact the field service

for more information.

Note on the LCD screen

The TV set with LCD screen you have purchased satisfies the most

rigorous quality requirements and has been inspected with respect

to pixel errors. Despite of thorough care when manufacturing the

display, it cannot be 100% guaranteed that no subpixel defects will

occur due to technical reasons. Please understand that these types

of effects, as long as they are within the standard of specified limits,

cannot be considered as a device defect in terms of the guarantee.

Avoid displaying still images for long periods of time. It is possible that

a copy of the image may remain.

TV sets with 3D function

Read the following safety instructions before using the 3D function

of your TV set.

Please use the Loewe 3D TV sets only with the Loewe 3D glasses

which can be purchased as an accessory from your Loewe dealer

(see chapter Accessories).

People that have a visual disorder may not be able to perceive 3D ef-

fects or may only be able to perceive them to a limited extent. People

who are sensitive to flickering images (e.g. those with epilepsy) should

only use the 3D function after having consulted their doctor.

It might take some time for you to get used to the 3D glasses and

before you can perceive the 3D effects properly.

Stop using the 3D function immediately if you experience any feelings

of nausea, dizziness or malaise when viewing 3D content.

Supervise children whilst they are viewing 3D content, as they can be

particularly sensitive to it.

Allow more time for a break when viewing 3D films, so that you are

able to relax. Failure to do this could result in headaches, fatigue, diz-

ziness or malaise.

Position yourself comfortably in front of the 3D TV set and ensure that

you are seated firmly. By doing this, you will avoid any injuries that may

arise due to reacting to extreme 3D content.

Switch off any artificial light sources (e.g. energy saving lamp) between

the 3D TV set and the 3D glasses. These could impair the infrared

reception or the TV picture may flicker as a result.

10 cm



For your safety

Loewe Art 40 - SL2 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Art 40 - SL2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info