Bedienungsanleitung Loewe Art 40 - SL3 (Seite 6 von 144) (Englisch)

645605

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Art 40-55

User manual

For your safety, and to avoid unnecessary damage to your unit,

please read and follow the safety instructions below:

Intended use and ambient conditions

This TV set is intended exclusively for receiving and playing visual and

audio signals. Your set is designed for operation in dry rooms. It must

not be used in rooms with a high level of humidity (e.g. bathroom,

sauna).

Please be aware that your TV set may react sensitively against dust

and soot particles in the ambient air. Excessive loads of this type may

damage the device or even lead to a malfunction.

Please take care for clean air environment to avoid any damage of your

device.

Soot and dust deposits can accumulate behind the front panel glass

of the LCD TV set without a visible source of soot being present. These

soot and dust deposits are also known as “fogging” or “magic dust”.

There are scattered instances of this phenomenon, but especially

during the warm-up period and after renovation work or in new

constructions. Various factors are mentioned as the cause, see too

the reports on the Internet.

In such cases cleaning or replacement of the panel is excluded from

the guarantee, since it does not involve a set defect, but rather an

external influence.

If the unit is used outdoors, make sure that it is protected from moisture

(rain, dripping water and splashing water or dew). High humidity and

dust concentrations lead to leakage currents in the device. This can

result in a shock hazard when touching it or even fire.

If you have moved the unit out of the cold into a warm environment,

leave it switched off for about an hour to avoid the formation of con-

densation.

Do not place objects containing liquids on top of

the unit. Protect the appliance against dripping

and splashing water.

Candles or naked flames must be kept away from

the TV set at all times to prevent it from catching

fire.

Never place the TV set in a location where it is

exposed to vibrations. This may lead to damage.

Transporting

Move the device in vertical position only. Get hold of the device on the

upper and lower edges of the housing.

Do not stand it up on the bottom edge, so as to reduce the risk of

damage and soiling. If the set has to be put down during packing/

unpacking, place the TV set with its entire front surface lying flat on

soft material. Use a blanket or the fleece from the packing material as

an underlay.

The LCD screen is made of glass or plastic and can break if not handled

properly.

Always wear rubber gloves to carry the TV set if the LCD screen is

damaged and liquid crystal might be leaking out. In the case of skin

contact immediately rinse thoroughly with water.

Power supply

Incorrect voltages can damage the unit. This device may only be

connected to a power supply with the voltage and frequency indicated

on the type plate using the supplied mains cable. The mains plug of the

TV set must be easily accessible so that the device can be disconnected

from the mains at any time. When unplugging the unit from the mains,

pull at the connector body and not at the cable. The cables in the mains

plug could otherwise be damaged and could cause a short-circuit when

plugged in again.

Lay the mains cable so that it cannot be damaged. Do not step on the

mains cable. The mains cable may not be kinked or laid over sharp

edges nor be exposed to chemicals; the latter also applies to the unit

as a whole. A mains cable with damaged insulation can cause electric

shocks and poses a fire risk.

Air circulation and high temperatures

The vent slots on the rear panel of the set must always be kept

unobstructed. Please do not place newspapers or cloths on/over the

TV set.

Make sure that there is at least 10 cm free space

on the sides and above the set for air circulation,

if the set is placed in a cabinet or on a shelf.

Like any electronic device, your TV set requires

air for cooling. Obstruction of the air circulation

can cause fires.

Prevent metal items, needles, paper clips, liquids, wax, or similar items,

from getting into the interior of the device through the vent slots in the

rear panel. Such objects can cause short circuits in the set, which

could possibly cause a fire.

If something should get into the interior of the set then immediately

unplug the mains plug of the device and contact the field service for

more information.

About the LCD screen

The TV set with LCD screen you have purchased satisfies the most

rigorous quality requirements and has been inspected with respect

to pixel errors. Despite of thorough care when manufacturing the

display, it cannot be 100% guaranteed that no subpixel defects will

occur due to technical reasons. Please understand that these types

of effects, as long as they are within the limits specified in the standard,

cannot be considered as a device defect in terms of the guarantee.

Avoid displaying still images for long periods of time. It is possible that

a copy of the image may remain visible.

TV sets with 3D function

Read the following safety instructions before using the 3D function

of your TV set.

Please use the Loewe 3D TV sets only with the Loewe 3D glasses which

can be purchased as an accessory from your Loewe dealer.

People with a visual disorder may not be able to perceive 3D effects

or may only be able to perceive them to a limited extent. People who

are sensitive to flickering images (e.g. those with epilepsy) should only

use the 3D function after having consulted their doctor.

It might take some time for you to get used to the 3D glasses and

before you can perceive the 3D effects properly.

Stop using the 3D function immediately if you experience any feelings

of nausea, dizziness or malaise when viewing 3D content.

Supervise children whilst they are viewing 3D content, as they can be

particularly sensitive to it.

Allow more time for a break after having watched 3D movies, so that

you are able to relax. Failure to do so could result in headaches, fatigue,

dizziness or malaise.

Position yourself comfortably in front of the 3D TV set and ensure that

you are seated firmly. By doing this, you will avoid any injuries that may

occur due to reacting to extreme 3D content.

Switch off any artificial light sources (e.g., energy saving lamp)

between the TV set and the 3D glasses. These could impair the infrared

reception or the TV picture may flicker as a result.

10 cm



For your safety

3D function available on selected models

Loewe Art 40 - SL3 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Art 40 - SL3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info