Bedienungsanleitung Loewe Art 40 - SL3 (Seite 25 von 144) (Englisch)

645605

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Art 40-55

User manual



Initial installation

Setting options for the satellite system

(DiSEqC one cable communal system):

 Select One channel or Two channels.

The number of system channels can be

selected only when just one DVB-S antenna

cable is used when selecting antennas.

Here you specify if you use one or two transmission

channels in your one cable communal system.

In case of two channels - as far as they are

available in your system - different stations can

be simultaneously viewed on the main picture and

on PIP.

You get more information on your system from

your dealer.

 Proceed to next step.

Select DiSEqC single cable communal

installation.

 Proceed to next step.

 Select satellites from list,

OK Confirm selection.

 Proceed to next step.

Number of

system

channel used

Number of system channels used

One channel Two channels

Do you wish to use one or two transmission channels in your single cable communal

installation? With two channels - provided they are available to you from the installation - it

is possible to watch different stations at the same time in the main screen and in the PIP.

Retour avec Continuer avec

User defined DELTA SUM-918 KATHREIN EXR-501

DELTA SUM-514 DELTA SUM-928 KATHREIN EXR-551

DELTA SUM-516 DELTA MSU-50x KATHREIN EXR-552

DELTA SUM-518 DELTA MSU-90x/170x KATHREIN EXR-154

Select DiSEqC single cable communal installation

Please enter here which DiSEqC single cable system you are using. The following setting

parameters of your system are then adapted accordingly.

Back with Proceed with

DiSEqC

one cable

communal

installation

Thor/Intelsat10-02 0,8

Eutelsat 5 West A 5°W

Nilesat 7°W

Eutelsat 7 West A 7,2°W

Eutelsat 8 West A 8°W

Eutelsat 12 West A 12,5°W

Telestart12 12,5°W

ASTRA3 23,5°E

ASTRA1 19,2°E

Eutelsat 16A 16°E

Hot Bird 13°E

Eurobird 9A 9°E

Eurobird 7A 7°E

ASTRA4A 4,8°E

Select satellites

Please specify here which satellite you receive.

Note: The newly selected parameter must be confirmed with the button.

Back with Proceed with

none

Optus D1160°E

Türksat 42°E

Hellas Sat2 39°E

Eutelsat 36A 36°E

Eutelsat 28A 28,5°E

ASTRA2 28,2°E

Satellite

selection

 Set LNB frequencies.

Normally, you do not need to change the

values unless the LNC (LNB) of your satellite

system uses a different oscillator frequency

(important for the frequency display).

OK Adopt settings.

 Proceed to next step.

 Select and adjust settings for the DiSEqC

single cable communal installation.

OK Adopt settings.

The manual registration must be made for both ANT

SAT jacks when either two DVB-S antenna cables or

two system channels are used.

Transmission

channel

Select the desired transmission channel.

Transmission

frequency

Select the corresponding transmission frequency.

PIN protection

If your system is designed for it, it is possible to

protect your used transmission data from use by

other subscribers with a PIN.

Define/

change PIN

Here you can determine and change the PIN for

PIN protection. Only possible, when yes has been

selected for PIN protection.

 Proceed to next step.

Proceed to section Setting options for DVB-S

reception (continued).

Please specify the oscillator frequency for the Low Band. High band frequency is auotm. adjusted

Note: The newly selected parameter must be confirmed with the button.

LNB frequencies

ASTRA1 19,2°E low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

ASTRA1 19,2°E high Band 10600 MHz 10750 MHz 11000 MHz 11250 MHz

Back with Proceed with

LNB

frequencies

Please log on to your DiSEqC single-cable system that is connected to the antenna input

ANT SAT and specify the desired transmission channel and associated transmission

frequency. Please also indicate whether your single-cable system has a broad frequency

band instead of a division into high and low band. If your antenna system is designed for

this, it is possible to protect your used transmission data from being used by other

participants by having a PIN.

Note: The newly selected parameter in each case must be confirmed with the button.

Transmission channel 1

2 3 4 5 6 7 8

Transmission frequency

1284 MHz 1400 MHz 1516 MHz 1632 MHz 1748 MHz

PIN protection Ja

Nein

Define/change PIN 000

Manual registration (for socket ANT SAT)

Back with Proceed with

Manual

registration

(for socket

ANT SAT)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Art 40 - SL3 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Art 40 - SL3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info