Bedienungsanleitung Loewe Art 46 3D (Seite 24 von 164) (Englisch)

475066

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

- 24

english

Network

selection

Settings

Encrypted

stations

method

Start

frequency

Network ID

Symbol rate

QAM

modulation

Setting options for DVB-C reception:

If you have not selected a DVB-C antenna in the antenna selection: Con-

tinue with Setting options for DVB-S reception (see right hand column).

If several networks are available over DVB-C, you can

decide which network you want to receive your channels

from. The normal DVB-C settings are derived from the

selection of the location or network and do not need to

be changed. Exactly which of the following settings are

present is dependent on which network is selected.

 Select network,

OK Proceed.

 Select and adapt settings for DVB-C reception.

You can state whether coded stations are to be searched

for in the search/update.

Select yes to save all found

scrambled stations. However, these stations can only be

received in connection with a CA module and the appro-

priate Smart Card.

Handling of the CA module is described

on page 65.

If a CA module with a SmartCard is already plugged in for

the station search, all the stations which this module can

descramble are also saved when no is preset.

If you want to run the station search independently of

the channel grid, select frequency search for the search

method.

The DVB stations are only searched for in the frequency

range above the start frequency.

Only change these defaults if you are familiar with other

symbol rates and types of modulation or if you have to

specify the network ID for your cable network. In the

case of small cable networks fed directly from the satel-

lite, the rate of 6900 might have to be replaced by 6111.

Your cable provider has the information you need.

OK Proceed.

Setting options for DVB-S reception:

If you have not selected a DVB-S antenna in the antenna selection:

Continue with Setting options for all types of reception on page 30.

The normal DVB-S settings are derived from the selection

of the location and do not need to be changed in most

cases.

 Selecting the satellite system.

Specify how you receive which satellite(s) (single

satellite or type of satellite system). Ask your dealer

if required.

Reception of a single satellite via a connected LNC (LNB).

See page 25 for settings.

Reception of two different satellites with two LNCs (LNBs)

which are connected to the TV set by a 22 kHz switchbox.

See page 25 for settings.

Reception of two different satellites with two LNCs (LNBs)

which are connected to the TV set by a toneburst switch.

See page 25 for settings.

The TV set controls a DiSEqC multiswitch to which up to

four LNCs (LNBs) for different satellites are connected.

See page 26 for settings.

Select setting if the TV set is connected to a DiSEqC

single-cable system (according to EN 50494). Several Sat

receivers can be connected to one Sat cable. See page

27 for settings.

Select setting if the TV set is connected to a single-cable

system (without DiSEqC). Several Sat receivers can be

connected to one Sat cable. Unlike a DiSEqC single-cable

system there are restrictions in the range of certain recep-

tion frequencies in single-cable community systems. See

page 28 for settings.

OK Proceed

(to the appropriate page of the satellite system).

INITIAL INSTALLATION (DVB-C)

Scrambled stations no yes

Search method Channel search

Start frequency 047.0 MHz

Network ID none

Symbol rate 1 (DVB-C) 6875

Symbol rate 2 (DVB-C) 6900

QAM modulation 1 64

QAM modulation 2 256

Proceed

INITIAL INSTALLATION (DVB-S)

Select satellite installation

Single satellite

2 satellites on 22 kHz switchbox

2 satellites on toneburst switch

Max. 4 satellites on DiSEqC multiswitch

DiSEqC one cable communal system

other communal installation

Proceed Back

Select

satellite

installation

Single

satellite

2 satellites

on 22 kHz

switchbox

2 satellites

on toneburst

switch

Max. 4

satellites

on DiSEqC

multiswitch

DiSEqC

one cable

communal

system

other

communal

installation

Initial installation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Art 46 3D Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Art 46 3D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info