Bedienungsanleitung Loewe Art 60 - SL2 (Seite 82 von 154) (Englisch)

645606

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

Art 40-60

User guide



System settings

Picture

3D function

You can use the 3D functionality of your TV set to display 3D material

transmitted by a channel or from an external player that is connected.

You require a pair of Loewe Active Glasses 3D to be able to use the

3D functionality in its entirety (see chapter Accessories). Please read

the operating instructions included with the 3D glasses.

3D settings

Using the 3D settings you can select the correct display format,

should this not have been detected automatically. What’s more, you

can choose to view 3D material in 2D or “traditional” 2D material in 3D.

For 3D content that is being played back from an external HDMI player,

the 3D display format is normally recognised correctly when the fac-

tory setting 3D mode טAutomatic is selected. You may need to set

the 3D mode manually to view 3D content from broadcasters.

Owing to a reduction in the luminance in 3D mode for technical

reasons,

Auto-dimming - Room

and

Auto-Dimming- Video (VBD+)

are deactivated when 3D contents is displayed.

If the TV set is operated with the remote control during a 3D play-

back, flicker effects can occur in the 3D glasses when doing this.

Calling 3D settings

HOME: Call Home view.

 Mark System settings,

OK call System settings.

 Mark Picture,

 go to next column.

 Mark 3D,

 go to next column.

 Select settings,

OK adopt.

...

Back

With this you can select the correct display format, should this not be recognised automatically, or you can deactivate

the 3D mode.

3D->2D

2D->3D

3D mode

3D->2D

2D->3D

3D mode

Automatic side by side top/bottom

off on

Explanations of the 3D settings:

3D->2D

off/on

If you set 3D->2D to on, the 3D material from TV sta-

tions as well as from external players will be changed

into 2D and played back. The three dimensional (3D)

effect will disappear. You will not need to wear the 3D

glasses to view it properly.

2D->3D

off/on

If you set 2D->3D to on, all 2D image material will be

displayed in 3D. You will need to wear the 3D glasses

to view it properly.

3D mode

Automatic

If the TV is set to this setting (factory setting), then

the TV set automatically switches over to the correct

3D mode, if this is possible and supported by the

broadcaster.

Only change the setting if the 3D content is not dis-

played correctly.

side by side

To display 3D content in side by side format. When

viewing 3D content with this setting, two almost

identical images are displayed next to each other

and put together correctly by the TV set.

The 3D mode is Automatic reset the next time you

switch on the TV set.

top/bottom

To display 3D content in top/bottom format. When

viewing 3D content with this option, two almost iden-

tical images are displayed one above the other and

put together correctly by the TV set.

The 3D mode is Automatic reset the next time you

switch on the TV set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Art 60 - SL2 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Art 60 - SL2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info