Bedienungsanleitung Loewe Art 60 - SL2 (Seite 86 von 154) (Englisch)

645606

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

Art 40-60

User guide

Automatic scan TV+Radio

For automatic scan TV+Radio, a search wizard will be started that

searches for new stations which are not yet stored.

You have to repeat the initial installation and auto-

matically search for new stations if you want to delete

all the existing stations and automatically search for

new ones.

HOME: Call Home view.

 Mark System settings,

OK call System settings.

 Mark Stations,

 go to next column.

Mark Automatic scan TV+Radio,

go to next column.

In the upper info text the current search settings will

now be displayed:

If you want to change these search settings:

 Select Change search settings,

OKwizard guides you through the search settings

(see column on the right).

If you agree with these settings:

 Select Start search/update,

OKstart scan.

BACK: Cancel current search/update.

Explanations of some search settings:

Age-related

lock

You can specify an age limit for your TV set here.

DVB broadcasts that have an appropriate age iden-

tification are locked and can only be watched after

entering the access code.

Signal source

Select cable (analogue), DVB-T, DVB-C or DVB-S

depending on which signal source you want to search

for new stations.

Use the Antenna wizard to call the configuration of

the DVB-T and DVB-S antennas.

Calling up the DVB antenna configuration causes

the Change search settings dialogue to be quit.

You must call up the dialogue again after finishing

the configuration.

Cable

(analogue)

TV/colour

standard

With the selection of TV set location the conven-

tional TV standard/colour standard is the default.

This should only be changed if stations with other

standards are to be searched.

......

Your TV carries out the update of the station list (search for new stations; delete

stations no longer broadcast) with the following settings:

Location of TV set D Germany

Signal source Cable analogue

Change search settings Start search/update

SEARCH WIZARD - Check search settings

End with

Explanations of some search settings (continued):

DVB-T/C/S

Network

selection

If several networks are available, you can decide

which network you want to receive your channels

from.

DVB-T/C/S

Settings

With the selection of set location the conventional

settings will be preset. Only change these defaults

if you are familiar with other parameters.

Scrambled stations:

(DVB-T/C/S)

You can state whether scrambled stations are to be

searched for in the search/update. If you select yes,

coded stations will also be searched for. However,

these stations can only be received in connection

with a CA module and the appropriate Smart Card.

Ask your dealer which Smart Card you need to re-

ceive certain stations.

Search method: (DVB-T)

If you want to run the station search independently

of the channel grid, select Frequency search for

the search method.

Search method: (DVB-C)

If you select Frequency search here, a search is

performed for all receivable stations. With Network

search, only the stations which the networks sup-

ply are searched - either for all receivable networks

or only for the particular network specified under

Network ID.

Network ID: (DVB-C)

If you select none here, DVB signals of all current

broadcasting networks are scanned automatically

(recommended for most cable networks).

If, on the other hand, you specify a certain network ID

(necessary in the cable networks of some countries),

only DVB signals of this broadcasting network are

searched for automatically. Your cable provider has

the information you need.

Search method: (DVB-S)

If you select Frequency search here, a search is

performed for all receivable stations. With Network

search, from all receivable networks all the stations

are searched which are supplied by these networks.

Accept Logical Channel Number: (DVB-T/C/S)

In various countries, digital stations (DVB-T/C/S) are

transmitted with a preset channel number per

station, known as Logical Channel Numbers (LCN).

If you select yes here, these default channel slots

will be used and the channels of the preferred signal

source will be sorted as per LCN. The stations in the

station list can no longer be shifted.



System settings

Stations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Art 60 - SL2 Seite 86

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Art 60 - SL2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info