Bedienungsanleitung Loewe articos 55hd (Seite 8 von 40) (Englisch)

143104

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Batteries

To insert or change the batteries, press the

point marked by an embossed arrow. Push the

cover of the battery compartment down and

remove it. Insert the batteries of the alkaline

manganese type LR 03 (AAA) with the correct

polarity (+/-).

Then push the cover back on.

If you are inserting batteries in the remote

control for the first time or changing the

batteries you will see the language selection

for the remote control in the display. Select

German or English with the rocker. Press the

SET button to confirm your selection. The

display shows the "TV" menu, the remote

control is set for operating the TV.

Note on disposal of batteries:

The original batteries do not

contain any pollutants such as

cadmium, lead and mercury.

Used batteries do not belong in

the domestic waste. They must

be taken to the appropriate

collection points according to

the national laws. Ask your

dealer.

Initial installation

Connection

Mains

Connect the TV set to a 230V/50-60 Hertz

outlet.

Antenna

Connect your antenna or cable system to the

antenna socket to the UHF/VHF antenna socket

on the back of the set.

When equipped with a DVB-T module, connect

your antenna system to the top socket of the

DVB-T module (IN) and connect the bottom

socket (OUT) to the antenna input of the PIP

tuner.

When equipped with a satellite tuner, connect

the satellite antenna to the SAT sockets.

Switching on

Press the On/Off button so that it is pressed in.

Note:

• Due to the optical back projection system it

takes about 30 seconds for the picture to

appear on the screen after switching on.

Full brightness is not reached until after 2

minutes.

• Due to the DMD technology used, up to four

black pixels may appear on the screen.

•Frequent switching on and off affects the

life of the built-in projection lamp.

Initial installation

Automatic programming of the TV set is started

the first time you switch it on. Follow the

menus.

First you have to select the menu language for

your set. Then you specify which antenna you

have connected to your TV and in what country

you are using it. Then you start the station

search. The TV set searches for, stores and sorts

all the stations which your antenna system

receives. You then see a list of the stored

stations in which you can mark your favorites.

Finally log in your video recorders, decoders,

Loewe audio system and Home Automation

with the connection wizard and connect these

to the TV set according to the illustrated

connection plan.

Select the settings with the

arrows on the ring ...

... confirm the settings with

OK. You then move on to the

next menu ...

... press this button if you want

information about the settings.

You can repeat initial installation at any time,

e.g. after moving house. Call the index in the

main information (i button). Then select the

item "Repeat initial installation". Then start

"Initial installation" with OK.

SUB

AV 2

(RGB)

AV 1

AV 3

(RGB/YUV

)

SYSTEM

LIN

SER

VICE

DIO

IN 1

AUDIO IN 3

OUT

➜

31599_021_Articos55_GB_(ro) 24.03.2004, 13:28 Uhr8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe articos 55hd Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe articos 55hd

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info