Bedienungsanleitung Loewe articos 55hd (Seite 24 von 40) (Englisch)

143104

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Operating other Loewe equipment with

the RC2 remote control

You can operate various Loewe equipment with

this remote control. In the ex-factory state

Loewe equipment is set for TV, VCD, DVD, DVD-

Preceiver 8116DT (DVD/Audio), Certos (DEV1,

DEV2) which you can operate directly. The d-

box common in Germany is set for the Set Top

Box (STB).

Press the MOD button with

the display on.

The Mode menu is displayed.

Mark the equipment or the

equipment combination you

want to operate with the

rocker.

Press the SET button to accept

the setting.

In addition you can operate equipment

combinations, e.g. this TV and a DVD player or

VCR. The bottom six buttons then take over

drive functions for the DVD player or VCR. In

this case, you cannot operate the Digital

Recorder.

Switching over the remote control for

operating equipment of other

manufacturers

You can switch over the remote control for VCRs,

DVD players and Set Top Boxes if the infrared

code of the equipment type is listed in the code

list or is in the code memory of the RC2.

Switching over is done on the one hand by

entering a four-digit code and on the other hand

the remote control suggests codes which you

can test on the switched on equipment.

If you cannot find the equipment in the code list,

try to switch over the remote control with "Step

by set".

Switching over the remote control - with

code input

Look for the code number of your equipment in

the code list. The list is sorted according to

equipment type - DVD, VCR, STB - and

alphabetically according to manufacturer. You

will find one or more code numbers next to the

manufacturer name.

Press the MOD button with the

display on. The Mode menu is

displayed.

Mark >RC Setup< with the

rocker.

Press the SET button to call the

RC settings.

Mark the equipment type with

the rocker - VCR, DVD, STB,

DEV1 (device 1), DEV2 (device

2).

Call the Setup menu with the

SET button.

Mark "By code" with the

rocker.

Press the SET button to show

the Setup menu.

Enter the four-digit code from

the code list with the number

buttons.

First enter the type of

equipment for DEV1 and DEV2:

1 = DVD (DVD player)

2 = VCR (video recorder)

3 = STB (Set Top Box)

4 = Certos

then the four-digit code from

the code list.

When the first digit is

underscored again, check

whether your input was

correct. You can correct it by

re-entering.

Confirm the input with SET if it

is correct.

Exit the SETUP menu with

MOD.

You will see the Mode menu

with the equipment selection

again.

Select the device you have just programmed to

test the functionality. If the device cannot be

operated or is difficult to operate, repeat the

code input with the next code from the list. If

no other codes are specified, try a code

suggested by the remote control.

SET

MOD

– Mode –

>RC Setup<

STB

DVD

SET

– RC Setup –

STB

DEV1

DEV2

HMM

SET

Setup DEV2

By code

Step and set

back

MOD

– Mode –

STB

DVD

VCR

– Mode –

DVD

VCR

TV+DVD

TV+VCR

SET

Setup DEV2

Type/Code ?

* * * * *

Setup DVD

Code ?

* * * *

SET

MOD

– Mode –

>RC Setup<

STB

DVD

Operating additional equipment

Setup DVD

Code ?

1 2 3 4

31599_021_Articos55_GB_(ro) 24.03.2004, 13:28 Uhr24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe articos 55hd Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe articos 55hd

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info