Bedienungsanleitung Loewe Auro 2216 (Seite 7 von 44) (Englisch)

35834

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

7 -

Welcome

Cleaning

Only clean your DVD-Preceiver with a damp, soft, clean cloth (with no aggres-

sive cleaning agents).

If DVD-Preceiver fails to read the disc correctly, the reader unit in the device

may be soiled. Use a commercially-available cleaning disc.

Always keep the disc drawer closed to prevent dust getting into the drawer

and onto the lens.

For your safety

For your own safety and to avoid unnecessary damage to your unit, please read

and follow the safety advice below:

This DVD-Preceiver is only to be used for receiving, displaying and playing

visual and sound signals.

Switch off your DVD system (Centros, TV and any other audio components

which may be connected) before connecting or disconnecting other devices or

speakers.

Do not open up the hous-

ing, or you could be directly exposed to the laser beam. The laser beam will be

visible if the unit is open.

DO NOT LOOK INTO THE LASER BEAM.

Protect your DVD-Preceiver from:

liquids and damp

shock and mechanical stress

magnetic and electrical elds

cold, heat, direct sunlight and extreme uctuations in temperature

dust

anything which obstructs ventilation

manual interference with the unit‘s interior

Your Auro has only been designed for use in a domestic environment. The war-

ranty covers this normal use of the DVD-Preceiver.

•

PLEASE NOTE: TO AVOID RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE

COVER (OR THE REAR OF THE UNIT). THERE ARE NO PARTS INSIDE THE UNIT

THAT CAN BE REPAIRED BY THE USER. REPAIRS SHOULD ONLY BE CARRIED OUT

BY A LOEWE DEALER.

If you have moved the DVD-Preceiver from a cold to a warm environment,

leave it to stand for about an hour because of the risk of condensation building

up. Do not switch it on until it has reached room temperature. This will avoid

seriously damaging the components.

Read this operating manual, and experiment with your new equipment‘s features

so that you are familiar with it.

Advantages of connection to a Loewe TV set

If you connect your Auro to a Loewe TV, you are able to enjoy the Loewe system

communication ”L-Link”. With L-Link, Auro and your TV join forces in an intel-

ligent network and form a high-performance home cinema system.

Auro and the TV exchange data via the L-Link, among other things to check

whether audio data are available (screen stays off) or whether audio and video

data are available (screen switches on automatically).

Thanks to L-Link your TV assumes that Auro will take over processing of all audio

signals within the equipment network. The Auro switches on automatically when

you switch on the TV.

You can operate the whole equipment network with ”one hand” using the Assist

remote control.

Technical requirements for L-Link

Loewe TV of chassis generation Q/S/P25xx TV software as of Version 6.0; if

your TV is equipped with an older software, please contact your Loewe dealer

for a software update

• L-Link cable connection must be established in a powerless state; see page

8/9.

Auro must be connected to the Euro AV-input AV2/3 of the TV; see page 9.

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Auro 2216 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Auro 2216

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info