Bedienungsanleitung Loewe bild 2.55 oled (Seite 9 von 227) (Englisch)

691484

Zoom out

Zoom in

Vorherige Seite

1/227

Nächste Seite

Loewe bild

User handbook

Notes on the LCD / OLED screen

The TV set with LCD screen or OLED screen purchased by you meets

the highest quality standards and has been checked for pixel errors.

Despite of thorough care when manufacturing the display, it cannot

be 100% guaranteed that no subpixel defects will occur due to techni-

cal reasons.

Please understand that these types of effects, as long as they are

within the limits specified in the standard, cannot be considered as a

device defect in terms of the guarantee.

For TV sets with LCD:

Avoid displaying static images over a longer period. Image persistence

errors may arise.

For TV sets with OLED:

Organic Light Emitting Diodes are an image technology based on

self-luminous pixels that offer clear benefits in terms of image quality

and performance.

Under certain conditions, persistent, one-sided loads on the OLED

material can result in persistence image faults which are irreversible.

Residual image issues can arise by using static image content over a

longer period, such as static images, subtitles or ticker displays, loop-

ing dia-shows or video sequences, static displays serving as presenta-

tion monitors or with video games, black bars in some screen formats.

These residual image issues are not defects within the meaning of

the warranty.

To minimise such issues, Loewe has developed a special algorithm

for detecting image content.

If static images are displayed for too long, the TV set automatically

switches to a screen-friendly contrast mode. After a new user opera-

tion, the device immediately returns to its normal state. In addition,

menu insertions are gradually reduced or displayed transparently

after one minute.

Under normal viewing conditions, such residual image issues do not

arise.

Notes on Kinematics

The Loewe TV sets types bild 9 and bild 7 are equipped with a kinemat-

ics that moves the TV set upwards or downwards when switching it on

and off, whereby the speaker cover is visible or is hidden.

Please make sure that there is no externally applied force opposing the

movement. You have the option to fix the position of the kinematics

from the menu, or disable the function.

You can find further information in the chapter System settings,

section Control – Display kinematics.

Software update

It is possible to update the software on your Loewe TV set.

In the software update (package update) all the software releases in

the TV set are scanned and updated as required.

You can find further information in the chapter System settings,

section Control – Software update.



Safety/Warning

Information about OLED calibration

Only for set types with OLED display

To maintain the high quality of picture display permanently, your Loewe

TV set calibrates itself automatically at regular intervals. In this way,

excess TFT capacitors are discharged and so-called image sticking

effects / „ghost images“ are eliminated.

When switching off the TV set from the remote control, where neces-

sary, the calibration process is started and lasts for a maximum of

thirty minutes.

During this period, the power supply to the TV set must not be inter-

rupted.

After the calibration is complete, the TV set switches to Standby mode.

Calibration does not take place during normal TV operation and so will

not have any negative impact on usage of the TV set.

If calibration is terminated by switching the set back on prematurely,

the TV-set will attempt to perform a recalibration again the next time

the TV is switched off.

You still have the possibility to start a refresh procedure manually by

means of the user menu of your Loewe TV set.

Call OLED calibration

HOME: Call Home view.

 Select System settings,

OK call System settings.

 Select Picture,

 go to next column.

 Select more ...,

 call other settings.

Select OLED calibration,

OKCall.

A calibration of the OLEDs is required every 1500 hours. This also starts

automatically when the TV set is switched off using the remote control.

Calibration lasts one hour maximum. If calibration was not finished

properly, an on-screen image will indicate this.

After the calibration is complete, the TV set switches to Standby mode.

Availability varies by device type (see chapter Technical data - equipment features for your TV set).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe bild 2.55 oled Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe bild 2.55 oled

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info