Bedienungsanleitung Loewe Bild 5.55 set (Seite 116 von 154) (Englisch)

679321

116

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

Loewe bild 5 oled / bild 4 oled

User handbook

116

Searching for scrambled stations

If no search for encrypted stations was performed during initial startup,

this can be done later using the search wizard.

HOME: Call Home view.

 Select System settings,

OK call System settings.

 Mark Stations,

 go to next column.

Automatic scan TV+Radio,

 go to next column.

Select Change search settings,

OKwizard guides you through the search settings.

Under scrambled stations you have to select yes.

Next select Start search/update,

OK start updating the station list.

Calling CA module information

This menu is only available when a CA module is

plugged in.

HOME: Call Home view.

 Mark System settings,

OK call System settings.

 Mark Extras,

 go to next column.

 Select desired CA module.

The indicated name depends on the inserted

CA module.

 go to next column.

 Select Module menu,

OK call information.

The content of this menu depends on the provider of

the CA module.

Smartcard rights

If two CA modules are used in parallel to decode stations, you specify

here the rights of both smartcards.

 Mark Smartcard rights

 go to next column.

 Select Same rights or Different rights.

If you select Same rights, the TV set assumes that

both smartcards have the same rights and can be used

for Dual Recording in parallel. In this case, the Station

mapping function is not available.

When selecting Different rights, you can assign the

stations to be decoded to the respective CA module.

Station mapping

If two CA modules are both used for the decoding of stations, you

decide here which station shall be decoded by which CA module.

The station mapping settings will only be taken into account, if two

CA modules are plugged.

This menu item is only available if under Smartcard rights the

item Different rights was selected.

This statement refers explicitly to the CI slots of the TV set and not

to the modules plugged into it! When the modules are exchanged,

the mapping must be repeated.

 Mark Station Mapping,

 call station list.

 Select CA module for mapping.

 Mark station,

OK map station to the selected CA module / cancel

mapping.

Behind the assigned station is the number of the

corresponding CI slot.

Storage the PIN for recordings

Store the programme provider PIN belonging to your CA module in

order to decode CI plus programmes with parental lock for recording.

The menu option is available only if the plugged CA module supports

storing the parental lock PIN.

 Mark Storage of PIN for recordings,

 call PIN entry box.

 Mark the desired CA module in the headline.

 Go to the PIN input line, use the numerical keys

to enter the programme provider PIN.

Or:

 Mark figure,

OK adopt figure to input line.

To conclude the entry:

 Mark Adopt,

OK save PIN.

Removing the CA module

Switch off TV set using the mains switch.

Remove the cover from the rear of the set.

Pull the CA module out of the CI slot.

Replace the cover.



System settings

Extras

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Bild 5.55 set Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Bild 5.55 set

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info