Bedienungsanleitung Loewe bild 9.65 (Seite 90 von 227) (Englisch)

691477

Zoom out

Zoom in

Vorherige Seite

1/227

Nächste Seite

Loewe bild

User handbook



System settings

Sound

Explanations of the sound settings (continued):

more ...

Loudspeaker/

Headphone

sound

Selection options for Mono/ Stereo or Sound 1 or

Sound 2 for bilingual programmes, separately for

the loudspeakers and the headphones.

The menu item appears only for analogue channels.

Auto volume

The volume may vary when receiving channels with

different standards, when switching from channel to

channel or during commercials.

You can reduce these differences in volume by

selecting auto volume on. For music and live broad-

casts you get a better sound spectrum with auto

volume off.

Maximum

volume

You can limit the volume adjustment of the loud-

speakers. This prevents selecting a volume which

is too loud.

Maximum

switch on

volume

Set the sound level to be heard after switching on the

TV set with the mains switch or after a power failure.

When switching on the TV set in standby mode, the

volume last used is retained unless it was above this

switch-on level. Otherwise it is limited by this.

Balance

Set stereo balance so that the volume impression is

identical on the left and right.

Dynamic

SPDIF sync

Audio synchronization with external devices is

achieved by dynamically adjusting the SPDIF fre-

quency.

Some AVRs (Audio/video receivers) do not tolerate

any adjustment of the frequency of +/- 1000ppm

and show sound drop-outs or no sound at all.

Only in this case, please select here off.

Surround modus

In the Surround mode menu point, two special virtualiser modes are

found that offer the possibility to simulate virtual surround sound via

the built-in TV loudspeakers.

Selecting the Surround mode

The choice is available for sound component - TV speakers. All other

audio components do not support this mode.

Adjustable in the System settings under Connections טSound

components.

The selection of surround modes is available when sound mode 

܃or܃ is used.

Adjustable in the System settings under Sound טSound mode

or in the current TV programme via the menu options (see chapter

TV, section Menu options).

HOME: Call Home view.

 Select System settings,

OK call System settings.

 Select Sound,

 go to next column.

Select Surround Mode,

OKcall.

Select the desired mode.

Explanation of the setting options:

Cinema

Surround

For the Cinema Surround mode an advanced

Virtualizer technology is used that is developed by

Loewe. This one improves speech intelligibility while

simultaneously widening the 3D sound.

Default setting ex factory.

Dolby Virtual

Dolby Virtual simulates the hearing impression of

a 5.1 surround sound system via the built-in TV

speakers.

Only for set types Loewe bild 9, Loewe bild 7, Loewe bild 5 oled and Loewe bild 4.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe bild 9.65 Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe bild 9.65

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info