Bedienungsanleitung Loewe bild i.48 dr (Seite 28 von 128) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

807080

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

deutsch

english

Loewe bild i | User Manual (part 2 of 2)

Electronic Programme

Guide – EPG

EPG stands for Electronic Programme Guide

and provides you with on-screen programme

details. With the system, as with a printed

programme guide, you can learn about the

current programme. In addition programmes

can be memorised and also recordings can be

programmed.

To open/close EPG, press the (EPG) button.

Note:

• EPG is only available for DVB stations.

• The first time you start EPG, a wizard will

start that guides you through the neces-

sary presettings.

• Depending on the number of stations se-

lected for EPG, it may take some time until

the programme information is displayed.

EPG Operation

In the left column there is a list of stations of

the selected source/station list (e.g. DVB-C,

personal list).

/: Scrolling in the station list page by page.

Up/Down arrows: Scrolling in the station list.

Left/Right arrows: Scrolling through the

programmes.

In the station list the currently running programs

are highlighted by lighter fields. A white vertical

line indicates the current time in the running

programs.

OK: Detailed information on the selected pro-

gramme will be called.

Red Button: Opens schedule screen.

Green button: Displays a menu where you can

assign colours to specific broadcast content

(for example, News, Movies, Sport). Use the

arrows and the OK button to assign the desired

content type to a specific colour. Exit this menu

by pressing the green button. Programmes that

belong to the categories you selected are now

highlighted in colour in the program guide.

Yellow button: View the previous day’s list of

programmes.

Blue button: View the next day’s list of pro-

grammes.

Programme preview

Use arrows to mark desired station in the

station list.

Press OK briefly to confirm selection.

In the top left window, the current programme of

the selected station is displayed now.

Recording a programme via EPG

You can programme timer recordings of TV

programmes conveniently using the EPG.

Press OK button to open Detailed info of selected

programme.

Select option [DR+] and press OK button.

Check the timer data and update it if necessary

(e.g. directory, start, end, recording type).

In the EPG a recording symbol is placed behind

the title of the programme.

Memorising a programme via the EPG

A programme that has not started yet can be

memorised. For memorised programmes, the

TV set will ask at the beginning of a programme

if it should change the channel accordingly or

switch on from the stand-by mode.

Mark the desired programme with arrows.

Press OK button to open Detailed info of selected

programme.

Select option [Reminder] and press OK button.

In the EPG, a memorise symbol is placed behind

the title of the programme.

Programming remote

control to Set Top Box (STB)

You have the possibility to program your remote

control for use with certain Set Top Boxes. All you

need to do is enter a three-digit numerical code.

You can find a list of all available devices and their

codes in the online user guide.

Proceed as follows:

• First, activate the device mode by pressing

the (Device) button for three seconds.

• Then press and hold the (Device) button

and the button to enter Set Top Box or

Learn mode. The LED will flash twice to con-

firm execution.

• Within the STB mode, then perform the

following steps:

1. To program, press and hold the (Device)

button and OK button for five seconds.

2. The audio LED flashes twice.

3. Now enter the code.

4. The audio LED flashes once to confirm.

5. Press the (On/Off) button to test.

6. If the Set Top Box responds, pressing the OK

button will complete the process and the LED

will flash twice for confirmation. Otherwise,

proceed again from step 3.

If an incorrect code is entered, the LED will light

for two seconds to indicate the error. The current

mode remains active.

If you do not press any button for ten seconds

after entering the code, the process will end auto-

matically. The audio LED lights up for two seconds

afterwards to indicate the termination.

Automatic search

You can also search for the desired device from the

list. To do this, proceed as follows:

1. Press and hold the (Device) button and

OK button for 5 seconds.

2. The LED will light up twice for confirmation.

3. Navigate up or down with the control pad to

select a device from the list.

4. When selected, the LED will light up for one

second.

5. Press the (On/Off) button to test.

6. If the STB responds, pressing the OK button

will exit this mode and the LED will flash twice

to indicate success.

Again, 10 seconds after there is no input, the

process will end. The LED will illuminate for two

seconds to indicate termination.

Teaching the remote control

All buttons except the device button can be taught-

in for the operation of devices that are not included

in the integrated database. The functions of the

selected button are then completely or partially

overwritten with the new codes.

To do this, the Loewe remote control must be po-

sitioned with the remote control to be replaced so

that the infrared windows are in line of sight with

each other at a distance of 1-5cm.

The learning process is started in STB/learn mode.

• First activate the device mode by pressing the

(Device) button for three seconds.

• Then press and hold the (Device) button

and the button to enter the Set Top Box

or learning mode. The LED will flash twice to

confirm execution.

• Within the STB mode, then perform the

following steps:

1. Press and hold the (Device) button and

the red colour button for five seconds.

2. The LED lights up twice for confirmation

and remains lit when the learning function

is activated.

3. Press the button on the Loewe remote control

that is to be learned. The LED flashes once.

4. Now press the desired button on the original

remote control.

5. The LED flashes twice for confirmation and

then remains lit. If a learning error occurs,

the LED flashes ten times but then remains

illuminated.

Electronic Programme Guide – EPG

Loewe bild i.48 dr Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info