Bedienungsanleitung Loewe Centros 1102 (Seite 62 von 70) (Englisch)

35837

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

- 62

Using other Loewe devices with the

RC3 remote control

You can use other Loewe devices with this remote

control.

Use the rotary switch to select

VCR, TV or a set-top box.

Loewe video recorders, Loewe tel-

evision sets and the d-box which

is commonly used in Germany as a

set-top box are set up ex-factory.

Using the drive buttons in the TV and

STB position for a VCR, DVD or digital

recorder

With both the TV and the STB, you can switch over

the six drive buttons (

, ,

, , , ) so that they control a

VCR or DVD player/recorder (ex-factory it is set to

control the built-in “Digital Recorder Plus“):

First set the switch to the main TV

or STB function.

Then press the END and

* EPG

buttons simultaneously for at

least 5 seconds. The display in

the top left of the remote control

will ﬂ ash twice.

Key in the ﬁ gures 988. The dis-

play will ﬂ ash twice more.

Now set the switch to the func-

tion that you require for the drive

buttons:

to DVD or VCR, or TV if the digital

recorder is to be used.

Press the # PIP button to ﬁ nalise

the setting. The display will ﬂ ash

another two times.

Setting the remote to control devices

made by other manufacturers

You can set the remote to work with other

video recorders, DVD players or set-top boxes if

the infra-red code of the device type appears in the

code list or if it is held in the RC3‘s code memory.

Even if the device‘s manufacturer appears in

the code list, it could be that the device cannot be

controlled.

Using a code input to set the remote

Look for the code number for your device in the

code list (see from page 63). The list is sorted

according to device type – DVD, VCR, STB – and

alphabetically by manufacturer. You will ﬁ nd one

or more code numbers next to the manufacturer

name.

Use the rotary switch to select

whether you want to switch to

using a VCR, DVD device or a

set-top box.

Press the END and

* EPG but-

tons simultaneously for at least

5 seconds. The display in the top

left of the remote control will

ﬂ ash twice.

Key in, one at a time, the four

ﬁ gures that you have found in the

code list (e.g. 0539 for the Loewe

DVD player).

After each ﬁ gure that you key in,

the display will ﬂ ash once, and

after the last ﬁ gure it will ﬂ ash

twice. If the ﬁ gure was wrong, the display will stay

illuminated for longer. This means that the code

number has not been accepted. If a double-ﬂ ash

signiﬁ es that the code has been accepted, you can

test the functionality of the device that you have

programmed.

If you are unable to control the device, or have

difﬁ culty in controlling it properly, repeat the code

input with the next code in the list. If there are no

other codes listed for the manufacturer in question,

try using the remote control‘s suggestions.

Using the remote‘s suggestions to set

up remote control

Switch on the device which you want to convert

the remote control to. Note that Standby is inad-

equate!

Use the rotary switch to select

whether you want to switch to

using a VCR, DVD device or a

set-top box.

Press the END and

* EPG but-

tons simultaneously for at least

5 seconds. The display in the top

left of the remote control will

ﬂ ash twice.

Key in, one by one, the ﬁ gures

991. The display will ﬂ ash once

after each ﬁ gure is input.

Press the # PIP button to select

the ﬁ rst code.

Point the remote at the device

which you want to convert it to

control. Watch the device.

Now press the (Play) or

On/Off buttons on the remote

control.

Wait a moment for the device to

react. If the device fails to react,

this is not the right code. Press

the # PIP button again to get the

next code.

Press the  (Play) or On/Off

buttons again.

If the device reacts, press the

* EPG button to copy over the

code.

Operating additional devices with RC3

DVD STB

VCR

DVD STB

VCR

EPG

wxyz

def

jkl

DVD STB

VCR

EPG

wxyz

PIP

DVD STB

VCR

DVD STB

VCR

EPG

wxyz

tuv

PIP

EPG

32122 DVD Rec_Centros_GB.indb 62 32122 DVD Rec_Centros_GB.indb 62 26.04.2005 11:24:0326.04.2005 11:24:03

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Centros 1102 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Centros 1102

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info