Bedienungsanleitung Loewe concept l 42 (Seite 17 von 24) (Englisch)

140195

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Your TV set has a combined analog-digital video

interface (Digital Visual Interface (DVI) and VGA

- RGB analog). You can use this to show PC

pictures with the TV set for example.

Connecting the PC

Note: Switch off the PC and the TV before con-

necting the cables.

DVI mode

Connect the external digital video source to the

socket on the rear labeled “AV6/7” with a DVI

cable.

You can connect the analog stereo audio signal

to the input “LINE IN AV6/7”.

Switch on the TV set and select the AV station

slot AV7 - PC DVI with

Switch on your PC and select monitor mode here.

Set the resolution if necessary.

You can call details about the DVI signal applied

to the AV7 socket with a menu.

Switch to the input AV7 - PC DVI with the AV

button.

Press

The TV menu is displayed.

Select the option “Settings” with v / V and

press B.

Select the option “AV7 – PC DVI” with v / V

and press B.

AV7 - PC DVI settings

???.? kHz

???.? Hz

???.? MHz

-/-

Horiz. frequency

Vert. frequency

Pixel clock

H/V polarisation

Analogue RGB mode (VGA)

If your external video source has an analogue

RGB-Video interface, please use the VGA-DVI

adapter cable provided.

The standards: VGA (640x480 @90Hz), XGA

(1024x768 @90Hz) or SVGA (800x600 @90Hz)

can be connected to the TV set (see page 22).

AV6 - PC RGB settings

Some parameters can be set for the analog RGB

video mode.

Switch to the input AV6 - PC RGB with the AV

button.

Press

The TV menu is displayed.

Select the option “Settings” with v / V and

press B.

Select the option “AV6 – PC RGB” with v / V

and press B.

END

AV6 - PC RGB settings

End

Back

???.? kHz

???.? Hz

???.? MHz

-/-

Horiz. frequency

Vert. frequency

Pixel clock

H/V polarisation

User values

Automatic adjust

Vert. position

Vert. size

Horiz. position

Horiz. size

Phase

User values: Calls up the “PC RBG User

Values” menu with B.

Automatic adjust: Optimally adapts the

picture automatically to the input signal after

pressing OK.

Vert. position: Setting the vertical picture

position.

Displaying PC images (DVI/VGA)

Vert. size: Setting the vertical picture size.

Horiz. position: Setting the horizontal picture

position.

Horiz. size: Setting the horizontal picture size.

Phase: Setting the phase position.

You can save the settings you made in up to

8 “value sets”. To do this, call the “PC RBG

User Values” menu under the “User Values”

menu item.

END

PC RGB user values

End

Back

Select value set

Recall selected value set

Save as selected value set

Delete all value sets

Select value set: Selecting a value set.

Recall selected value set: Activating the

selected value set.

Save as selected value set: Saving the set-

tings in the value set speciﬁ ed under “Select

value set”.

Delete all value sets: Deleting all value sets.

Important: Prolonged display of PC images

(longer than 10 minutes) should be avoided

because the image contours may remain visible

on the screen even after the device has been

switched off. See also page 6 “Please note”.

32241 Concept L42_Buch_GB.indd 1732241 Concept L42_Buch_GB.indd 17 11.02.2005 14:09:38 Uhr11.02.2005 14:09:38 Uhr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe concept l 42 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe concept l 42

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info