Bedienungsanleitung Loewe Connect 32 3D (Seite 121 von 156) (Englisch)

475107

121

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

121 -

english

Audio connection in HDMI/DVI devices

External devices with DVI connection

If an external device with DVI interface is connected via a HDMI/DVI

adapter to one of the HDMI sockets of the TV set, you can connect the

digital sound of the external device to the digital audio input socket

AUDIO DIGITAL IN.

The assignment of the digital audio input to the corresponding HDMI

socket of the TV set takes place as described in the column on the left.

If you want to use the analogue sound of the external device, connect

it to the AUDIO IN socket.

External devices with HDMI connection

If external devices with an HDMI interface are connected to one of the

HDMI sockets of the TV set, no assignment of the audio input is necessary

because the digital transmission of picture and sound takes place via a

single connection in HDMI.

Serial interface RS-232C (RJ12)

You can connect either the Loewe Individual Sound Projector SL or a home

network system of different manufacturers (e.g. AMX, Crestron) to your

TV set via the upgradable RS-232C (RJ12) interface.

Please consult your dealer for configuration of the RS-232C (RJ12) interface

and further information about the different home networking systems.

Assignment of the digital audio input

In order to be able to hear the digital sound of an external device con-

nected to an AV input, an AV input can be assigned to the digital audio

input socket AUDIO DIGITAL IN. By switching to this AV input, the digital

audio signal at the AUDIO DIGITAL IN input is communicated to the integral

digital multi-channel audio decoder and the digital audio output socket

AUDIO DIGITAL OUT. You will then hear the digital sound of the assigned

AV input instead of the analogue sound if available.

Connecting devices to the digital audio input

For the digital audio playback from an external device, e.g. the DVD player,

you have to feed the digital audio signal to the TV set.

The external digital audio signal can be reproduced via the digital multi-

channel audio decoder integrated in the TV set, via an externally connected

digital audio amplifier or via a Loewe Individual Sound Projector SL

➠ If an external audio amplifier or Loewe Individual Sound

Projector is used, this must be registered in the sound

components wizard (see page 120).

MENU: Call TV menu.

Select Connections,

 go to the menu line below.

Select Miscellaneous,

 go to the menu line below.

Select Assign digital audio input,

 go to the menu line below.

Select AV input.

To connect a DVD player to the digital audio input of the

TV set for example, connect the digital output socket of

the DVD player (DIGITAL OUT) via a cinch cable to the

AUDIO DIGITAL IN socket on the TV set.

Connection example for a DVD player, see right hand

column.

to AVS to HDMI1 to HDMI2 to

TV MENU

Connections

Miscellaneous

Assign digital audio input

to AV

External devices

AUDIO

DIGITAL

TV set

DVD player

DIGITAL

OUT

Only with retrofitted serial interface (RJ12) (see page 121 and equipment and

upgrade possibilities on page 140).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Connect 32 3D Seite 121

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Connect 32 3D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info