555264
137
Zoom out
Zoom in
Vorherige Seite
1/162
Nächste Seite
Connect ID 40-55 DR+
User guide
137
Troubleshooting
Problem Possible cause Remedy / Instructions
The TV set switches off automatically. The automatic shutdown switches off the
TV set to save energy after 4 hours of inacti-
vity as soon as at least one signal input group
is set up in the energy efficient mode Home
Mode.
Using automatic shutdown is recommended
for the purposes of energy saving and safety.
All menus are displayed in the wrong langu-
age.
The menu language was set incorrectly. Set the menu language:
Press HOME key. Call last menu item
(bot-
tom left). Mark the fourth item from above in the
following list and move to next column to the
right. Call first list item with OK. Select the lan
-
guage and confirm it with OK.
General problems when connecting external
devices via an AV input.
The Signal type is set incorrectly. Set the correct signal type (System settings
ט Connections ט AV connection settings
טSignal type).
If AV standard or Signal type is set to
Automatic then this can lead to false detec-
tions with non-standard signals. In this case
standard and signal must be set according to
the information in the operating manual of the
external device.
With Teletext various characters are displa-
yed incorrectly.
The wrong character set has been set in the
System settings.
Set the correct character set: System set-
tings ט Control ט more ... ט Standard
Teletext ט Character set ט Standard or
select the appropriate character set.
Errors occurred when running a CA module. Switch the TV set off. Remove the CA-module
from the TV set. Wait a few seconds. Reinsert
the CA module. Switch the TV set on again.
No sound via the external digital audio am-
plifier.
a) The external digital audio amplifier does
not support the selected sound format
(Dolby Digital, dts, MPEG).
b) TV set and external digital audio amplifier
are not connected with each other.
a) Set PCM stereo on the DVD player in the
sound selection. For DVB stations switch
Language/Sound
b) Connect SPDIF OUT from the TV set to a
digital input of the external digital audio
amplifier and select the appropriate input
to this.
A programmed recording was not made. The provider deleted the programme from
the EPG data, for example due to a pro-
gramme change.
The station from which the recording was
made does not support automatic time
control (Accurate Recording).
Only the broadcasting organisations are re-
sponsible for transmitting data for the auto-
matic time control. The availability of the
appropriate data cannot be guaranteed.
There is no start or end of a programmed
recording although the automatic time
control (Accurate Recording) was used.
The transmission time of the program was
delayed and the channel from which the recor-
ding was made has not updated the data.
Only the broadcasting organisations are re-
sponsible for transmitting data for the auto-
matic time control. The availability of the
appropriate data cannot be guaranteed.
No IP address will be issued to your TV set in
spite of automatic IP configuration.
No DHCP server is working on your network. Set up a DHCP server.
Assign the IP addresses for the TV set manu-
ally.
137

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

loewe-connect-id-55-dr-plus

Suche zurücksetzen

  • Auf dem Bildschirm habe ich eine Einblendung mit dem Vermerk, bei der Kommunikation mit Ihrem CI Plus CA Modul in - Slot 2 ist ein Fehler aufgetreten Fehler code 3 Für Hinweise zum weiteren Vorgehen sehen sehen Sie bitte in der gedruckte online Bedienungsanleitung nach. Eingereicht am 27-10-2019 14:31

    Antworten Frage melden
  • Ich bringe Favoritenliste nicht mehr heraus und kann auf andere Sender nicht mehr schalten
    Eingereicht am 25-10-2018 14:45

    Antworten Frage melden
  • Fehlercode 3
    Bei der Kommunikation mit dem "CI Plus" CA- Modul in CI-Slot2 ist ein Fehler aufgetreten. Eingereicht am 8-9-2017 22:14

    Antworten Frage melden
  • Wie funktioniert die Mediathek beim Löwe Connekt55i Eingereicht am 3-2-2017 10:38

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Loewe Connect ID 55 DR plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Loewe Connect ID 55 DR plus

Loewe Connect ID 55 DR plus Bedienungsanleitung - Deutsch - 162 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info