Bedienungsanleitung Loewe Reference 85 (Seite 12 von 162) (Englisch)

645585

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

Reference 55-85

User manual

Installing the TV set

Mounting options / Installation notes

Your Loewe dealer can also assist you in finding other mounting

options. Look for the corresponding directions in the installation

instruction.

The four round self-adhesive covers that are supplied with the TV set,

are used as a cover of the four rear panel openings when installing the

TV with Floor Stand Reference 75 / 85 MU.

Choose a place for installing your TV set where no bright light or

sunlight shines directly onto the screen. This could cause reflections

which impair the picture.

3 times the screen diagonal can be taken as a guide value for the

viewing distance (e.g., for a 55-inch set approx. 4.2 m for SD signal).

The viewing distance can be reduced with an HD/UHD signal.

Cable fixing

Reference 55:

Using the Velcro cable tie supplied, you can fix the rear cables.

When using the table or floor stand, they are to be fixed at the mounting

option (see corresponding installation instructions).

When using the wall mount, you can feed the Velcro cable tie through

the two openings of the rear panel.

Reference 75 / 85:

With the self-adhesive cable supports supplied, you can fix the

connecting cables.

You can determine the position of each cable support according to

your needs. The figure contains an exemplified positioning.

with table or floor stand

with wall mount



Preparing the TV set

Set covers

Reference 55:

In order to remove the rear side cable covers pull them simply from

the device.

To fit the cover, insert the lugs at the top edge of the cover into the

corresponding cut-outs in the rear panel and push up the cover until

it snaps in.

The side cover of the TV set can also be completely removed. For this,

open it as far as it will go and gently pull on the open cover.

The cover detaches from the holder and gives free access to the

connection area. To replace the cover, simply push it until it latches

back into place.

A cable bushing connects the lateral and posterior terminal region. In

this way you can pass the cables of the lateral connections through

and lay them out together with the rear connecting cables.

Reference 75 / 85:

To remove the two parts of the cable cover, use for each half the two

grip recesses at the bottom of the device. Pull the covers carefully

away from the TV set.

The side cover can be swung open.

A cable bushing connects the

lateral and posterior terminal

region. In this way you can

feed the cables of the lateral

connections through and lay

them out together with the rear

connecting cables.

To fit the cover, place the upper

edge of the cable cover at the

TV set and press the guides

into the profiles of the rear

panel until the cover snaps into

place on the TV.

If necessary, move the cover

up until it is flush with the stop.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Reference 85 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Reference 85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info