Bedienungsanleitung Loewe Reference Sound Subwoofer (Seite 20 von 78) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch)

475139

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

- 20

English

Commissioning and setting

Before beginning with start-up and operation, make sure that all the cables are

connected correctly.

Switching the subwoofer on/off

Switch the Power switch k to the ON position to switch on the energy supply

(mains 230V/50Hz) for the Reference Sound Subwoofer. Set the switch to OFF to

switch off the subwoofer completely.

Automatic or manual operation

If the subwoofer is connected as described on page 8 and the Mode switch l

is in the Auto position, you no longer need to switch the subwoofer on and off

separately. After switching on the subwoofer for the first time it is switched on

and off automatically with the Loewe TV set.

If the subwoofer is operated on other devices than the Loewe Flat-TV, the Mode

switch l must be switched to the Manu. position. The subwoofer must then be

switched on/off manually with the Power switch k.

Settings on the Loewe TV set

TV set in the chapter “Operating additional equipment – Connecting audio

ampliÀ ers”.

Setting the equalizer

Using the knob Equalizer f you can set the lowest frequency ranges (20 Hz -

50 Hz) for bass playback to be raised or lowered.

• If the Subwoofer is near the corner of the room, then set the knob Equalizer

more in the direction max.

Phase switch

With the phase converter Phase e you have the option of optimising the

bass playback. However, you can easily make this setting in connection with

a Loewe Flat TV (from chassis L27xx with integrated AC3 decoder onwards)

using a remote control via the TV menu in the sound component assistant (see

operating instructions under „Setting loudspeaker system“). The phase converter

is designed for systems where settings can not be made using the TV.

We recommend you to proceed as follows:

• Start DVD playback for example and select a title with bass parts.

• Have a second person activate the phase switch whilst you sit and listen.

• Decide for yourself which switch position reproduces the best bass sound.

Bass intensity

Using the controller Bass-Intensity h you can set the basic bass volume to

suit you.

Setting the crossover frequency

The Crossover Frequency knob g gives you the possibility of setting the

limit frequency for bass reproduction between 50 Hz and 250 Hz depending on

which speakers you have connected.

The knob should be set to 250 Hz for Loewe Audio Systems because the crosso-

ver frequency is set in the Loewe audio sources (TV).

Cover on the subwoofer

After you have made the settings described in “Commissioning and setting”,

replace the cover on the rear of the subwoofer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Reference Sound Subwoofer Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info