Bedienungsanleitung Loewe spheros 20 (Seite 11 von 34) (Englisch)

140094

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

the ”Satellite installation” menu the

antenna switch corresponding to your satellite

installation.

•2 satellites on 22 kHz switch

•2 satellites on sound burst switch

•4 satellites on DiSEqC switch

• Common satellite system

Note

With “Common satellite system” (multi

link), no LNC power supply voltage is supplied

by the “SAT” socket.

• In the “Satellites on switch” menu,

select, for example, Astra for “Sat. 1” and

Hotbird (13° east) for “Sat. 2“, etc.

• In the “LNC frequency(ies)” menu, set

the corresponding oscillator frequency for

each LNC.

H) In the “Automatic channel search”

menu an overview is given of the settings

made to this point.

Select the line “Change settings” if you

want to correct the settings.

After you have confirmed with OK, the “TV

Location” menu is displayed again, etc.

I) If everything has been set correctly, start

programming by selecting “Perform

search” and confirm with the

OK button.

Once the channel search and save is

complete, the channel preview is displayed.

This can be removed using the END button.

First installation

➝

Start automatic programming:

After you have answered all the questions for

automatic programming, the selected settings

are displayed.

To search for and save channels.

J) Select the ”Perform search ” line.

K) Press the OK key to start automatic

programming.

The television searches for, saves and sorts

all TV programmes that can be received on

your antenna installation, and then displays

an overview of the programmes.

L) Now press the OK key to start programming

radio programmes.

The radio programmes are displayed in a

programme list.

Press the END button to close the programme

list and return to television operation.

Programming other satellites …

Continued from page 9, operating step E).

For the following settings, you will need the

corresponding information on the parameters

of the channels transmitted by the satellite.

– Select the line “Other”.

– Confirm with OK.

– Indicate whether your aerial system can

also receive high band.

Note

Satellites can transmit channels in the low

band and the high band.

– Enter the LNC oscillator frequency.

– In the “Video parameters for Sat.”

menu, enter:

– the “Standard” (transmission standard)

If you select “Automatic”, then a search will

be made for broadcasting stations with the

PAL, SECAM and NTSC standards. You can

also search for a broadcasting station with

a specific standard, e.g. SECAM.

– the “Amplitude”; normally “Amplitude

Autom.” is selected. For encoded channels,

it may be necessary to set another

amplitude value, e.g. 4.

–“Baseband”; normally “Baseband off”

should be selected. Some Pay TV decoders

require the baseband signal for decoding

Pay TV channels; in this case, select

“Baseband on”.

–“Polarity”; satellites can transmit

channels with a negative or a positive

polarity. If the polarity is set incorrectly, a

negative image of the picture will be

displayed, or the picture will flicker.

–”Sound carrier for Sat.” menu

In this menu you can select a sound carrier

frequency using the left/right arrows on the

ring, or set a frequency in the range 5.50 to

9.10 MHz directly using the numeric keys.

LCD_SAT_31715022_GB 10.08.2004, 15:44 Uhr11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe spheros 20 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe spheros 20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info