Bedienungsanleitung Loewe Xelos 40 (Seite 28 von 122) (Englisch, Holländisch)

475102

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

- 28

english

Setting options for all types of reception:

 Select favoured signal source.

Select the signal source from a list, the station of

which is to be at the top of your station list (starting

with station slot 1).

The listed signal sources depend on the selected

antennas and, if the set is equipped with a satellite

tuner, the type of satellite system used and the

received satellites.

OK Proceed.

 Accept Logical Channel Number no / yes.

In some countries, digital channels (DVB-T, DVB-C,

DVB-S) are transmitted with a prescribed programme

number per channel; these are known as “Logical

Channel Numbers” – “LCN”.

If you select yes here, these prescribed channel slots

will be used and the channels of the preferred signal

source will be sorted as per LCN. Depending on the

LCN, spaces or double channel allocations can occur

in the numbering of the channel list.

OK Proceed.

Initial installation

Favoured

signal source

Logical

Channel

Number

INITIAL INSTALLATION

Favoured signal source

DVB-T

DVB-C

ASTRA1 19,2°E

Antenna/cable (analogue)

Proceed Back

Setting options for DVB-S reception (continued):

After you have made the previous settings, you should

receive picture and sound of the selected satellites (only

possible for Astra1 and HOTBIRD).

OK Proceed.

 Select and adapt settings.

If several satellites are received, the following settings

must be made for every satellite. The scope of the settings

may differ depending on the selected satellite.

You can state whether coded stations are to be searched

for in the search/update.

Select yes to save all found

scrambled stations.

However, these stations can only be

received in connection with a CA module and the appro-

priate Smart Card. Handling of the CA module is described

on page 55.

If a CA module with a SmartCard is already plugged in for

the station search, all the stations which this module can

descramble are also saved when no is preset.

If you want to run the station search independently of

the channel grid, select frequency search for the search

method.

The symbol rates are specified by the satellite provider

and do not normally need to be changed.

OK Proceed.

Test reception

Settings

Encrypted

stations

method

Symbol rates

INITIAL INSTALLATION

The ratio of signal (Carrier) to noise (Noise) (C/N) shows you the quality of the

received DVB signal. The greater the value the better.

Astra1 19,2°E C/N Level

The signal level tells you how strong the DVB reception is.

Proceed Back

yes

INITIAL INSTALLATION (ASTRA1 19,2°E)

Scrambled stations no

Search method Channel search

Symbol rate 1 (DVB-S) 27500

Symbol rate 2 (DVB-S) 22000

Proceed Back

no yes

INITIAL INSTALLATION

Logical Channel Number

Accept Logical Channel Number

Proceed Back

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe Xelos 40 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe Xelos 40

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info