Bedienungsanleitung Loewe XELOS A 42 (Seite 14 von 46) (Englisch)

645613

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

- 14

First installation

Directing DVB-T antenna

Note: not with DVB-T stations in UK.

If you use a room antenna to receive one or more DVB-T stations that have picture

and sound interference, then you should change the location of where the antenna

is set up. To help you direct your antenna or to help you determine the most suitable

location to set up the antenna, your TV set has a display for the signal quality C/N

and the signal strength Level.

Consult your specialist dealer to find out which channels and frequency bands (VHF

or UHF) are used to broadcast the digital TV stations in your area.

On any one channel, several digital stations are broadcast.

Select a TV channel

1. Call the “TV menu“ via the MENU button.

2. Use  to select “Settings“, then use  to select the menu line underneath.

3. Select “Stations“, then use  to select the menu line underneath.

4. Select “Manual adjustment“ and call the menu using OK (not possible for

MHEG-5 device versions x27/28).

5. For digital stations, select “Signal source – DVB-T“.

6. Use the numerical buttons to specify the corresponding channel number.

Depending on the channel selected and country, the system automatically sets

the corresponding bandwidth of 7 or 8 MHz. You should only change the band-

width under special circumstances - if the channel raster in your area is different

from the standard.

When you receive a digital station, the system displays the signal quality

C/N via a bar/numeric value and the signal strength via Level. The antenna‘s

direction or position is best when the largest values possible are displayed (long

bar) for the signal quality and signal strength.

7. Direct the antenna so that the largest numerical value/bar size is reached.

8. If no signal is found in the channel set, you can start the frequency search run

by pressing the blue coloured key within the band selected.

9. Check the other channels one after another on which digital stations are broad-

cast terrestrially in your area.

For the weakest station, direct the antenna so that the maximum numerical

value/bar size is achieved.

10. After you position or direct the antenna, we recommend to search for all the

stations using the “Search wizard“ (TV menu – Settings – Stations – Search

wizard).

INFO

END

Manual adjustment ...

Language

Parental lock

Stations

Timer functions

TV menu

Settings

END

Manual adjustment

Signal source

Channel

Frequency

Name

Bandwidth

C/N 96

DVB-T

E 05

177.50 MHz

est

7 MHz

Level 99

DVB-C

Antenna/cable (analogu

Daily operation

Switching on/off

Your TV is equipped with an eco-standby power supply unit. On standby, the

power consumption drops to low power. If you want to save even more electricity,

switch the set off with the mains switch. However, please bear in mind that EPG

data (electronic programme guide) will be lost, and programmed timer recordings

will not be performed by the TV.

Switching off

If the TV set is switched on, you can switch it to standby using

the On/Off button O on the remote control or by using the

indicator field on the set. The red lamp on the TV set lights up.

If the lamp is orange, a timer recording is being made, EPG data

is being captured or radio operation without screen display is

active.

Switching on the TV set

From standby, it is best to switch the set back on using the

On/Off button O or by using the numeric buttons of the remote

control (0 – 99).

Or use the switch integrated in the indicator on the set.

The green indicator on the TV set lights up.

Or switch on the TV set with OK, you can then see the station

list and select a station.

Switching on the radio

With the RADIO button on the remote control

with R on the control ring of the TV set, you can switch on the

radio.

If you switch off the TV set using the mains switch on the set, the indicator no

longer lights up.

If the TV set is switched off via the mains switch, then you have to first switch it

into standby mode via the mains switch and then switch it on with the remote

control or by using the indicator window on the set.



BA32789_021XelosModusRel_5_GB.in14 14BA32789_021XelosModusRel_5_GB.in14 14 15.01.2007 16:54:0615.01.2007 16:54:06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe XELOS A 42 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe XELOS A 42

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info