Bedienungsanleitung Loewe XELOS A 42 (Seite 28 von 46) (Englisch)

645613

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

- 28

Operating modes – EPG

In front of the programme’s title, the system places an . This station is switched

later to this programme when the set is switched on. If the TV is off, it switches on

again automatically at the beginning of the marked programme if this has been

set in the EPG menu. If you are out, a security prompt prevents the TV set staying

on unattended.

Before leaving the upper selection lines using the blue coloured key, select a

specific line. If you have switched back to the programme list, you can change this

menu line using  without having to leave the programme list.

Programming recording for recorders

The programme marked using the  buttons can be prepared for recording by

pressing the red coloured key. In the following menu, confirm the timer data or

change them as required. Then a red dot is set in front of this programme in the

EPG programme list as an identification (if timer data is being transferred to the

recorder, no red dot is set). If you select this programme, you can delete it from

the timer using the red coloured key (if the timer data has been transferred to a

recorder, the timer has to be deleted there).

EPG menu

Call EPG menu

You will find the following settings in the EPG menu:

• Select provider • Station selection • Timer list • Data capture

• Switch on TV when marked

Selecting providers and stations

If you want to change the provider for analogue TV reception (the station which

transmits EPG data) to have other stations evaluated, you can do this under

“Select provider“.

Select “Select provider“ and call this menu using OK. If the station you want to

switch to is not listed in the “Select provider“ list, then use the yellow coloured

key to start the automatic search for stations with EPG data. This takes a while.

Or, if you know the station that transmits EPG data, press the blue coloured key

to compile manually. Select the provider in the station list and adopt it by using

OK and return to the provider selection using .

Select the provider in “Select provider“ and adopt it using OK. Then a station list

search is performed. The stations offered by the provider are displayed in a list.

First, all stations are marked with the  symbol so that their data is display-

ed in the programme guide (precondition: provided EPG data is broadcast for

the respective station). Stations indicated by  are analogue terrestrial/cable

stations, stations indicated by  are DVB-T stations, stations indicated by  are

DVB-C stations and stations indicated by  are DVB-S stations. These stations are

available for evaluation in the programme guide.

Select the stations you want to omit from the programme guide one after another

and deactivate each one by using OK. The  symbol is removed.

Data capture

After these settings or after each time the set is switched off using the mains

switch, the data must first be collected, before switching on the set.

To do this, select the station you have defined as a provider and leave the TV

set switched on for about one hour or switch the set to the standby mode. After

about two minutes in standby mode, the indicator on the set turns orange. The

data acquisition begins and lasts about 1 hour. When data acquisition is termi-

nated, the indicator turns red again. The data are also automatically captured

between 2 a.m. and 5 a.m. when the TV is switched to standby.

A prerequisite for data capture is that “Data capture“ is “on“ (for DVB + analogue)

in the EPG menu.

Note: If the TV set is switched off using the mains switch or the mains plug is

pulled out, all EPG data are lost.

If, for example, you cannot receive any analogue EPG providers or if you only use

DVB, you should set the data capture to “on (only for DVB)“.

Switch on TV when marked

You can have the TV switched on automatically from standby at the beginning of

the marked programme. If you are not present at the time, a safety prompt makes

sure the TV switches off again after 5 minutes.

INFO

END

Switch

Data captureStation select

Timer list

EPG menu

Select provider

BA32789_021XelosModusRel_5_GB.in28 28BA32789_021XelosModusRel_5_GB.in28 28 15.01.2007 16:56:1915.01.2007 16:56:19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe XELOS A 42 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe XELOS A 42

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info