Bedienungsanleitung Loewe XELOS A 42 (Seite 32 von 46) (Englisch)

645613

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

- 32

Operating additional equipment

Search for and store the station of the video recorder (if no Euro-AV

cable is available)

Switch on the test station on the VCR or insert a recorded tape and start playback.

In some video recorders the station must be switched on by activating the modu-

lator.

Then call the AV selection on the TV set with 0 AV. Select the menu item “VIDEO“

in the AV selection and call using OK.

To prevent “normal“ TV stations being found in the search, pull out the antenna

plug from the antenna input of the VCR temporarily (the cable to the antenna

system).

If you cannot see the test station or playback from the cassette, the VCR is

transmitting on a different channel. You then have to search for the station or set

it manually.

1. Call the TV menu with the MENU button.

2. Select the “Settings“ menu item with .

3. Select the line below using  and use  to select “Stations“.

4. Select the line below using and select “Manual adjustment“ using 

and call this menu using OK.

5. Enter channel “E30“ under the “Channel“ menu item (“Antenna/cable (analo-

gue)“ select in this menu above, if necessary).

6. Start search with the blue coloured key.

7. When the station has been found, change the name if needed, confirm with

OK and save with the red coloured key.

8. A list of the stored stations is displayed.

9. Select 0 (VIDEO) here and overwrite this station storage location using the red

coloured key.

10. Hide the menu again using the END button.

Plug the antenna plug back in.

If you now get interference because a TV station is transmitting on the same

channel as the VCR station, you have to change the transmitting station on the

VCR and search for the VCR station on the TV again.

You have logged in and connected all connected equipment in the initial instal-

lation. If you want to connect other equipment or disconnect equipment, call the

connection wizard.

Call up the TV menu

Select “Connections“

Select the submenu line

Select “New devices/modifications“ and ...

Call using OK.

State what equipment you want to connect. State whether a piece of audio equip-

ment is to be connected (more details as of page 35). The connection wizard then

shows you which sockets you should connect this equipment to. Then connect the

equipment to these sockets according to the connection diagram.

Connecting video/DVD recorders

In addition to the connection via the Euro-AV sockets, you also have to connect

the antenna (only for terrestrial antenna or cable systems) through the VCR/DVD

recorder to the TV set. The antenna signal is then available to the video/DVD

recorder and the TV set.

Note: Use Euro-AV cables with right-angled plugs as shown.

ENTREE

ANTENNE

EURO AV2

DECODER

EURO AV1

AUDIO/

VIDEO

SORTIE

ANTENNE

AERIAL

RF OUT

SORTIE

OUT

AUDIO

AV1 ANT-TV

BA32789_021XelosModusRel_5_GB.in32 32BA32789_021XelosModusRel_5_GB.in32 32 15.01.2007 16:56:4115.01.2007 16:56:41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Loewe XELOS A 42 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Loewe XELOS A 42

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info