Bedienungsanleitung Logitech Harmony Smart Control (Seite 5 von 71) (Holländisch)

536778

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

3BP A3 Plus



This monitor is specially tested for use in pregnancy and pre-

eclampsia. When you detect unusual high readings in preg-

nancy, you should measure again after 4 hours. If the

reading is still too high, consult your doctor or gynaecologist.

How do I evaluate my blood pressure?

The higher value is the one that determines the evaluation.

Example: a blood pressure value of 140/80 mmHg or a value of

130/90 mmHg indicates «blood pressure too high».

2. Using the Device for the First Time

Inserting the batteries

After you have unpacked your device, first insert the batteries. The

battery compartment

is on the bottom of the device. Insert the

batteries (4 x 1.5 V, size AA), thereby observing the indicated polarity.

Setting the date and time

1. After the new batteries are fitted, the year number flashes in the

display. You can set the year by pressing the M-button AT. To

confirm and then set the month, press the time button AK.

2. Press the M-button to set the month. Press the time button to

confirm and then set the day.

3. Follow the instructions above to set the day, hour and minutes.

4. Once you have set the minutes and pressed the time button, the

date and time are set and the time is displayed.

5. If you want to change the date and time, press and hold the time

button down for approx. 3 seconds until the year number starts

to flash. Now you can enter the new values as described above.

Selecting the correct cuff

Microlife offers different cuff sizes. Select the cuff size to match the

circumference of your upper arms (measured by close fitting in the

centre of the upper arm).



Optional preformed cuffs «Easy» are available for better

fitting and comfort.



Only use Microlife cuffs.



Contact Microlife Service if the enclosed cuff 6 does not fit.



Connect the cuff to the device by inserting the cuff connector 7

into the cuff socket 3 as far as it will go.

Selecting the user

This device allows to store the results for 2 individual users.



Before each measurement, set the user switch 9 for the

intended user: user 1 or user 2.



User 1: slide the user switch 9 upwards to the user 1 icon.



User 2: slide the user switch 9 downwards to the user 2 icon.



The first person to measure should select user 1.

Select the measuring mode: standard or MAM mode

This device enables you to select either standard (standard single

measurement) or MAM mode (automatic triple measurement). To

select standard mode, slide the MAM switch 8 on the side of the

device downwards to position «1» and to select MAM mode, slide

this switch upwards to position «3».

MAM mode (highly recommended)

 In MAM mode, 3 measurements are automatically taken in

succession and the result is then automatically analysed and

displayed. Because the blood pressure constantly fluctuates, a

result determined in this way is more reliable than one produced

by a single measurement.

 When you select the 3 measurements, the MAM-symbol BL

appears in the display.

 The bottom, right hand section of the display shows a 1, 2 or 3

to indicate which of the 3 measurements is currently being

taken.

 There is a break of 15 seconds between the measurements

(15 seconds are adequate according to «Blood Pressure Moni-

Table for classifying home blood pressure values in adults in

accordance with the international Guidelines (ESH, AHA, JSH).

Data in mmHg.

Range Systolic Diastolic Recommendation

blood pressure too

low

 100  60 Consult your

doctor

1. blood pressure

optimum

100 - 130 60 - 80 Self-check

2. blood pressure

elevated

130 - 135 80 - 85 Self-check

3. blood pressure too

high

135 - 160 85 - 100 Seek medical

advice

4. blood pressure

dangerously high

160  100  Urgently seek

medical advice!

Cuff size for circumference of upper arm

S 17 - 22 cm

M 22 - 32 cm

M - L 22 - 42 cm

L - XL 32 - 52 cm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech Harmony Smart Control Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Logitech Harmony Smart Control

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info