Bedienungsanleitung Logitech Harmony Smart Control (Seite 35 von 43) (Englisch)

536778

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

Logitech Harmony Smart Control

programming it to do.

6. Add steps or delays to your sequence as desired.

7. Click Save when finished. Your Sequence will appear in the list.

8. Assign your button sequence to a single button as described in the next section, Customizing Activity

buttons.

Customizing Activity buttons with the Harmony App

NOTE: You can customize only the three Activity buttons at the top of the Smart Control remote

using the Harmony App. Each button can support two different activities: one with a short tap and

one with a long press of the button. With MyHarmony, you can customize any button on the Smart

Control remote. For more information about customizing your Smart Control remote buttons, refer

to Customizing buttons and on-screen commands with MyHarmony.

1. Tap the icon.

2. Tap Settings.

3. Tap Edit Activities and Devices.

4. Tap Remote.

5. Tap Customize.

There are two groups of settings on this screen. The first group controls the actions of the Activity

buttons when using a short press of the button; the second group controls the actions of the Activity

buttons when pressing and holding the button for a couple of seconds.

6. Tap the button to customize.

7. Select an Activity to associate with the button.

8. Tap Done.

Customizing buttons and on-screen commands with MyHarmony

Harmony allows you to customize the commands that each button sends, or what commands appear in your

Activity list. These button mappings may be unique for each of your Activities. This allows each button or screen to

have different functions based on context. For example, in your Watch a DVD Activity, the yellow button may

perform the eject command, while in your Listen to Music Activity this same yellow button may be used to pull up

your Favorite preset.

When customizing your Harmony remote you may find that commands have slightly different names than those of

your original remote. For example, Select, OK, and Enter often perform the same action, but may be named

differently based on the original manufacturer.

Activities mode

When you select an Activity to map buttons for, the buttons only perform the assigned functions while the activity

is in progress for which they were mapped. If you want to assign a button function for all Activities, you will need to

do it for each individual Activity.

How to map buttons to your remote with MyHarmony

1. Select the Buttons tab on the left hand side of the screen.

2. Select an Activity for the area of the remote you would like to create a sequence for and click Go.

3. Select a button on the illustration of the remote. You can scroll the illustration to see buttons at the

bottom of the remote.

4. Hover over a command to assign to that button and click on Long Press, Short Press, or Both to make

the selection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech Harmony Smart Control Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Logitech Harmony Smart Control

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info