Bedienungsanleitung Logitech Harmony Ultimate (Seite 34 von 54) (Englisch)

536777

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

Logitech Harmony Ultimate

4. Tap Hub assignments.

5. Select a device that you want to control using your Harmony Ultimate remote and not the hub or IR mini

blasters.

6. A menu of options for how to control the device is displayed.

7. Select Remote only.

Once you have set up your remote like this, it will prompt you to keep your remote pointed at your devices until it is

finished sending commands to your devices. Depending on your Activity, the Harmony Ultimate may send power

commands to your devices very rapidly after the Activity is launched. Keeping the remote carefully pointed at your

devices immediately after starting an Activity will help ensure the power and other commands reach your devices

successfully.

The Harmony Hub and connected IR mini blasters will by default all send infrared commands to your devices.

The Hub assignments menu mentioned above can be used to specify which of the Harmony Hub or IR mini blasters

should control specific devices, helping to optimize your system.

For example, if IR mini blaster 1 is placed inside your entertainment cabinet, assign all the devices in that cabinet (or

on that specific shelf) to be controlled by IR mini blaster 1. Only that IR mini blaster will send infrared to those

devices.

TIP: Devices controlled using the Harmony Ultimate remote and not the hub or IR mini blasters

require that you keep the remote pointed at them when starting an Activity, sending commands, or

using the Help feature.

Use the Help function to put the remote back in sync with devices

Sometimes Harmony becomes out of sync with your devices and confuses when they are on or off, or which input

they are on. This occurs when there is an obstacle between the device and the IR transmitters in the hub, IR mini

blaster, or remote; or if the devices are operated manually or by using their original remote control.

1. Harmony Ultimate can run through a series of questions to help identify the issue and correct it. Tap the

icon.

2. Select Help.

3. Answer Yes or No to the questions on the screen.

Based on your answers, your remote re-sends the necessary commands to synchronize it with your devices.

NOTE: If you use the Help feature frequently when powering on your devices or switching between

Activities, then there may be changes that can be applied to correct this. The Help feature should not

be necessary with a properly configured setup.

TIP: Before you use Help, make sure you take steps to address the problem: remove any obstacles

from the line of sight between your remote and your system, and only use the remote when it is

within range of your entertainment system.

For more information about using the on-remote Help feature, refer to the Harmony Ultimate On-Remote Help

FAQ.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech Harmony Ultimate Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Logitech Harmony Ultimate

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info