Bedienungsanleitung Logitech squeezebox touch (Seite 11 von 156) (Deutsch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

160933

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

English 11

Quick start guide

* Squeezebox Touch normally relies on a DHCP server to provide an IP address

during setup. If you prefer to use a static IP address, you can do it one of two ways:

Make sure your DHCP server is off, and input a static IP address when Squeezebox •

Touch displays the appropriate screen.

Set up and connect your Squeezebox as normal using DHCP. After setup is complete, •

go to the Settings screen and change the IP address by entering it manually.

For more information on how to set a static IP address, go to:

www.mysqueezebox.com/support.

Music is not playing

If music is not playing, do the following:1.

Check the cables to your stereo or powered speakers to make sure they are connected 2.

properly.

Check the input selector on your stereo to make sure it matches the inputs you used. 3.

Check the volume on your stereo. 4.

Add exceptions to your ﬁrewall software. If you are listening to music from your 5.

computer (using Squeezebox software), make sure there are no ﬁrewall warnings on

your screen and make sure your ﬁrewall has the proper exceptions. Required exceptions

include: port 3483 UDP, port 3483 TCP, and port 9000 TCP.

As a test, try playing a different song. 6.

If Squeezebox Touch says “Stopped,” check your internet connection.7.

I can’t ﬁnd my music collection in My Music

If you want to play the music collection that is stored on your computer but your

computer name does not appear in My Music, do the following:

Make sure that you’ve installed Squeezebox software from1. www.mysqueezebox.com.

Make sure Squeezebox software is running.2.

Windows• - Hover your mouse pointer over the software icon in your task bar. If you

don’t see “Squeezebox software Running,” right-click on the icon and select Start

Squeezebox software.

Macintosh• - Click on System Preferences, and then click on Squeezebox

software. If the button displays Start Server, click it. If the button is labeled Stop

Server, the application is already running.

If you are using a third-party ﬁrewall such as 3.

Trend Micro, Norton, McAfee

OneCare

please see our Knowledge Base at www.mysqueezebox.com/support and search for

articles on your speciﬁc ﬁrewall. If your ﬁrewall is not covered by our Knowledge Base, add

exceptions for three ports as follows: port 3483 UDP, port 3483 TCP, and port 9000 TCP.

For information on how to make this change in your ﬁrewall software, search the internet

for “exceptions, ports, <your ﬁrewall application name>,” or contact technical support for

your ﬁrewall software.

If your network uses multiple routers or Voice over IP (VOIP) or you’re on a corporate 4.

network that has a complex or segmented network conﬁguration, ensure that your

computer and Squeezebox Touch are on the same network segment. This allows

Squeezebox Touch to automatically connect to Squeezebox software on your computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech squeezebox touch Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Logitech squeezebox touch

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info