Bedienungsanleitung Logitech Transporter (Seite 6 von 21) (Englisch)

64792

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

10 Logitech

11Transporter

™

Owner’s Guide

Conﬁ guring Transporter

The instructions below use the remote control to set up Transporter. You can also use the front

panel controls. To scroll up and down, turn the knob on the front panel. Pressing the center of

the knob is equivalent to pressing the

RIGHT arrow on the remote. Pressing the BACK button

on the front panel is the same as pressing the

LEFT arrow. The other buttons on the front

panel are the same as the corresponding buttons on the remote.

When you plug in Transporter, the Slim Devices logo is displayed brieﬂ y, followed by

a welcome message.

Set Up Networking

1. Press the RIGHT arrow on the remote control. The Set Up Networking menu option

is displayed.

2. Press the

RIGHT arrow to enter networking setup.

3. Choose whether you want to connect Transporter to a wireless or wired network

by pressing the

UP and DOWN arrows on the remote. When you have made your

selection, press the

RIGHT arrow. If you are using an ethernet connection, skip to step

4. Transporter prompts you for your local region or country. Scroll using the DOWN

arrow on the remote until you ﬁ nd the local region. Press the

RIGHT arrow to select

your region.

Note: Failure to select the appropriate region may violate local laws.

5. Transporter will scan to ﬁ nd your wireless network. Select your network name (SSID)

and press the

RIGHT arrow.

If you are in an area where there are multiple wireless networks, you can scroll

down using the remote until you ﬁ nd the one you want to use. If your router is not

broadcasting your network name, you will need to select “Enter a network name”.

Tip: You can use the number buttons on the remote to enter text as you might

on a

cell phone. Use the PLAY button on the remote as a backspace and the ADD

button to insert a letter.

6. If your network is secured with WEP or WPA encryption, you’ll need to enter the

network password or key using the numbers and letters on the remote and press

the

RIGHT arrow. If your network supports more than one type of encryption

at a time or is not broadcasting its SSID, Transporter may ﬁ rst ask you to choose

your encryption method.

Tip: WEP keys consist of a string of ten or twenty-six digits or letters A through F.

WPA

passwords are a string of letters, numbers or punctuation.

Enter the subnet mask for the network, the default gateway IP address, and the

address of your DNS server, pressing the

RIGHT arrow on the remote to move to each

one.

Tip: If you are having trouble connecting to your wireless network, check the

Frequently Asked Questions section at the end of this guide.

Select a Music Source

1. If SlimServer isn’t already running, start it now.

Transporter will scan your local network to ﬁ nd the computer that’s running

SlimServer. If you started SlimServer after conﬁ guring Transporter, you may need to

scroll to ﬁ nd it.

Tip: If SlimServer is running on your computer and you don’t see it in this menu,

check the Troubleshooting section at the end of this guide and make sure that any

ﬁ rewall software you have installed is conﬁ gured properly.

You can also choose to connect to the SqueezeNetwork internet service.

See the SqueezeNetwork section of this guide for more information.

2. Select the computer you want to use. If you are running SlimServer on multiple

computers on your local network, you can use the

DOWN arrow to scroll to the one

you want to use.

3. Press the

RIGHT arrow on the remote to connect.

Setup is complete.

Tip: If you want to go back to setup later press the LEFT arrow on the remote

down

and hold it for ﬁ ve seconds. Transporter will return to the Set Up

Networking menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech Transporter Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info