Bedienungsanleitung Logitech Z 5450 (Seite 3 von 26) (Englisch, Französisch)

474693

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

English

Initial Setup Overview:

1. Front Satellite Speakers

Before attaching the cables, position the two front satellite

speakers on either side of your computer monitor or television

about the same distance from each other as from you. Angle

them to face you. Place the two rear speakers behind you

and about the same distance apart as the front speakers.

Your Logitech® Z-5450 speaker satellites are wall mountable.

Unscrew the satellite stand from the satellite speaker base,

exposing the stability pins on the base. Rotate the speaker stand

180 degrees and reattach the stand to the base, ensuring the

stability pins line up with the openings provided. Do not over

tighten the screw. Mount the speakers using appropriate wall

anchors through the holes in the stands.

For a pro-audio look, remove the cloth grilles by pulling them straight

off. Removing the grilles will not affect sound quality.

2. Center Channel Speaker

Depending on your conﬁguration, place your center channel speaker

on your desk (angled up), on top of your monitor or television (angled

down), or wall-mounted (angled down). Your Logitech® Z-5450 speaker satellites are wall mountable.

Unscrew the satellite stand from the satellite speaker base, exposing the stability pins on the base.

Rotate the speaker stand 180 degrees and reattach the stand to the base, ensuring the stability

pins line up with the openings provided. Do not over tighten the screw. Mount the speakers using

appropriate wall anchors through the holes in the stands.

3. Subwoofer

Because bass frequencies are non-directional, the subwoofer can be placed anywhere in relation to the

other speakers. To ensure optimum sound quality, do not block the driver or the bass port. To achieve

the strongest bass, place the subwoofer near a wall, corner or under a desk.

Note: Please ensure adequate ventilation around the subwoofer. Keep the cooling ﬁns on the back of

the subwoofer at least 6 inches away from any object.

4. Digital SoundTouch™ Control Center

Position the Digital SoundTouch™ Control Center where it is easy to reach.

5. With the power off and the speakers in place, connect the speaker wire to the spring clips on the

front and center satellite speakers and to the corresponding spring clips on the subwoofer. For each

speaker wire, make sure to match the red and black spring clip terminals on the subwoofer with the

corresponding terminals on the speakers. To connect, push the tab on the spring clip, insert the wire

into the connector, and release the tab. Make sure that you match the wire color to the spring clip

colors on both the subwoofer and the satellite.

To setup your system, see the Quick Start guide.

Digital SoundTouch™ Control Center Overview

1. Digital LCD

2. Input: Use to select audio source (Optical 1-2, Coax, 6 ch. Direct or Stereo 1-3)

3. Effect: Use to select sound effect (Stereo, Dolby® Pro Logic® II, etc.)

4. Settings: Adjust parameters of digital surround sound effects

5. Mute: Mute the system

6. Level: Use to select subwoofer, center, rear or main volume

7. Pro-audio style knob: Adjusts volume, subwoofer, center, and other levels

8. System Power: Toggles between Ready and Standby modes

9. Antenna: Transmits left and right rear audio signals to the wireless rear speakers

Remote Control

All functions are available on the remote control

1. Test: The Test State is only available from the remote.

See the section on “Test State” for a full description of this mode.

2. System Power

3. 6 ch. Direct / Stereo 1: Select 6 ch. Direct Input source (when in Stereo 1-3, this button will select Stereo 1 input source)

4. Stereo 2: Select Stereo 2 input source (only works in Stereo 1-3 mode)

5. Stereo 3: Select Stereo 3 input source (only works in Stereo 1-3 mode)

6. Optical 1: Select Optical 1 input source

7. Optical 2: Select Optical 2 input source

8. Coax: Select Coax input source

9. Sub up/down: Adjust subwoofer level

10. Center up/down: Adjust center channel level

11. Surround up/down: Adjust surround (rear) level

12. Effect: Select sound effect

13. Volume up/down: Adjusts main volume

14. Mute: Mute the system

15. Settings: Adjusts parameters of digital surround sound effects

This information is also shown on the Quick Start guide.

Important:

For your safety, set up the entire system

before plugging it into a power source.

Important:

For your safety, set up the entire system before

plugging the subwoofer and the wireless rear

speakers into a power source.

. dir

reo 1

reo 2

reo 3

ical

ial

test

volum

sub

ect

sur

rou

enter

settings

Connecting Your Speakers

Digital SoundTouch™ Control Center & Remote Control

234

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Logitech Z 5450 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info